Product details
- Spool Valve Motor
- Cast Iron Material
- Manifold, O-Ring Port
- 2 Bolt Mount
- Spline Output Shaft
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
Specifications
Displacement (in³/rev) | 8.91 |
Bolt Circle Dia. | 4.187 in |
Output Torque at Rated PSI (inch/pounds) | 1954 in lb |
Mounting Holes | 0.535 in |
Port Size | Manifold, 5/16-18 UNC Threads |
Port Type | Manifold, O-Ring |
Mounting Type Code | A |
Corrosion Resistant | No |
Flow [Max] | 15 gal/min |
Displacement | 146 cm3/Rev |
Maximum Speed @ Continuous Flow | 385 rpm @ 15 gal/min |
Pilot Diameter | 3.25 in |
Special Features | None |
Port Location | Side Port |
Shaft Size & Type | 1 in - 6T Spline |
Series | H Series |
Inlet Pressure [Max] | 2500 psi |
Torque | 221 Nm |
Port Code | C |
Mount Type | 2 Bolt |
RPM [Max] | 385 rpm |
Material | Cast Iron |
Splines | 6 |
Motor Type | Spool Valve |
Pressure [Max] | 1700 psi |
Paint Code | A |
Output Shaft Code | 02 |
Flow Rate | 57 lpm |
Special Features Assembly Code | 0 |
Case Drain | None |
RPM [Min] | 385 rpm |
Seal Material | Buna-N |
Motor Element | Gerotor |
Paint | Primer Low Gloss Black |
Rotation | Standard Rotation |
Duty | Standard-Duty |
Intermittent Pressure [Max] | 159 bar |
Shaft Type | Splined |
Special Features Hardware Code | 00 |
Flange Orientation | Standard |
Mounting Hole Size | 0.54 in |
Paint/Packaging | Low Gloss Black, Individual Box |
Case Drain Code | 0 |
Weight | 13.0 LB |