Product details
- Spool Valve Motor
- Cast Iron Material
- Manifold, O-Ring Port
- 2 Bolt Mount
- Straight Output Shaft
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- SAE ports
- Splined and tapered shafts
Specifications
Motor Type | Spool Valve |
Motor Element | Gerotor |
RPM [Min] | 1021 rpm |
Inlet Pressure [Max] | 2500 psi |
Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
Series | H Series |
Material | Cast Iron |
Intermittent Pressure [Max] | 165 bar |
Special Features | Free Running Gerotor |
Flange Orientation | Standard |
Bolt Circle Dia. | 4.187 in |
Output Torque at Rated PSI (inch/pounds) | 497 in lb |
Splines | 0 |
Port Code | D |
Output Shaft Code | 24 |
Flow Rate | 38 lpm |
Torque | 56 Nm |
Flow [Max] | 10 gal/min |
Pilot Diameter | 3.25 in |
Special Features Hardware Code | AA |
Paint Code | A |
Displacement (in³/rev) | 2.2 |
Shaft Type | Straight |
Duty | Standard-Duty |
Mount Type | 2 Bolt |
Port Type | Manifold, O-Ring |
Rotation | Standard Rotation |
Seal Material | Buna-N |
Pressure [Max] | 1800 psi |
Displacement | 36 cm3/Rev |
Shaft Size & Type | Straight |
Case Drain | G 1/4 (BSP) |
Case Drain Code | 2 |
Mounting Holes | 0.535 in |
Port Location | Side Port |
Paint/Packaging | Low Gloss Black, Individual Box |
Corrosion Resistant | No |
Port Size | Manifold, M8 x 1.25 Threads |
Paint | Primer Low Gloss Black |
Mounting Type Code | A |
RPM [Max] | 1021 rpm |
Mounting Hole Size | 0.54 in |
Special Features Assembly Code | 0 |
Weight | 13.0 LB |