Product details
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
Specifications
Port Code | B |
Pressure [Max] | 1800 psi |
Geroter/Geroler Options | Free Running |
Flow [Max] | 10 gal/min |
Torque | 56 Nm |
Motor Type | Spool Valve |
Flange Orientation | Standard |
Seal Material | Buna-N |
Series | H Series |
Port Size | 1/2-14 |
Port Type | NPTF |
Output Torque at Rated PSI (inch/pounds) | 496 in lb |
Bolt Circle Dia. | 3 1/4 in |
Intermittent Pressure [Max] | 165 bar |
Duty | Standard-Duty |
Displacement (in³/rev) | 2.2 |
Port Size & Location | 1/2 in NPTF Side |
Paint Code | A |
Motor Element | Gerotor |
Port Location | Side Port |
Rotation | Standard Rotation |
Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
Pilot Diameter | 1.75 in |
Case Drain | None |
Corrosion Resistant | No |
Paint/Packaging | Primer Low Gloss Black, Individual Box |
RPM [Max] | 1021 rpm |
Inlet Pressure [Max] | 2500 psi |
Mounting Holes | 3/8-16 |
Paint | Primer Low Gloss Black |
Splines | 6 |
Shaft Size & Type | 1 in - 6T Spline |
Material | Cast Iron |
Mounting Type Code | B |
Case Drain Code | 0 |
Output Shaft Code | 02 |
Special Features Assembly Code | 0 |
Special Features | Free Running Gerotor |
Flow Rate | 38 lpm |
Displacement | 36 cm3/Rev |
Shaft Type | Splined |
Mount Type | 4 Bolt |
Special Features Hardware Code | AA |
Mounting Hole Size | 3/8-16 UNC-2B |
RPM [Min] | 1021 rpm |
Weight | 11.2 LB |