Product details
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
Specifications
Port Location | Side Port |
Seal Material | Buna-N |
Case Drain | None |
Mount Type | 4 Bolt |
Shaft Type | Straight w/ Woodruff Key, Corrosion Resistant |
Paint | Environmental Coated Gloss White |
Splines | 0 |
Flange Orientation | Standard |
Pressure [Max] | 1650 psi |
Port Code | B |
Output Torque at Rated PSI (inch/pounds) | 2059 in lb |
Bolt Circle Dia. | 3 1/4 in |
Series | H Series |
Mounting Holes | 3/8-16 |
Displacement | 159 cm3/Rev |
Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
Flow Rate | 57 lpm |
Displacement (in³/rev) | 9.7 |
Flow [Max] | 15 gal/min |
RPM [Max] | 353 rpm |
Inlet Pressure [Max] | 2500 psi |
Pilot Diameter | 1.75 in |
Intermittent Pressure [Max] | 155 bar |
Special Features Assembly Code | 0 |
Motor Type | Spool Valve |
Paint Code | D |
Corrosion Resistant | Yes |
RPM [Min] | 353 rpm |
Port Size & Location | 1/2 in NPTF Side |
Port Size | 1/2-14 |
Special Features Hardware Code | 00 |
Special Features | None |
Paint/Packaging | Environmental Coated Gloss White |
Mounting Hole Size | 3/8-16 UNC-2B |
Duty | Corrosion Resistant-Duty |
Material | Cast Iron |
Torque | 233 Nm |
Case Drain Code | 0 |
Output Shaft Code | 27 |
Port Type | NPTF |
Motor Element | Gerotor |
Rotation | Standard Rotation |
Mounting Type Code | B |
Shaft Size & Type | Straight |
Weight | 12.5 LB |