Product details
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Speed sensors
- Five mounting styles
- Low-speed spool
- Nine shaft options
Specifications
Rotation | Standard Rotation |
Corrosion Resistant | No |
RPM [Min] | 585 rpm |
Mount Type | 4 Bolt |
Displacement (in³/rev) | 5.9 |
Pilot Diameter | 1.75 in |
Special Features Assembly Code | 0 |
Shaft Type | Straight w/ Woodruff Key |
Output Shaft Code | 01 |
Pressure [Max] | 1800 psi |
Bolt Circle Dia. | 3 1/4 in |
Splines | 0 |
Inlet Pressure [Max] | 2500 psi |
Case Drain Code | 0 |
Displacement | 96 cm3/Rev |
Shaft Size & Type | 1 in x 1/4 in Straight |
Series | H Series |
Motor Type | Spool Valve |
Special Features Hardware Code | AC |
Port Size & Location | 1/2 in NPTF Side |
Mounting Hole Size | 3/8-16 UNC-2B |
Paint | Primer Low Gloss Black |
RPM [Max] | 585 rpm |
Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
Torque | 155 Nm |
Mounting Type Code | B |
Motor Element | Gerotor |
Paint/Packaging | Low Gloss Black, Individual Box |
Port Code | B |
Port Location | Side Port |
Case Drain | None |
Paint Code | A |
Flow Rate | 57 lpm |
Flow [Max] | 15 gal/min |
Flange Orientation | Standard |
Material | Cast Iron |
Port Size | 1/2-14 |
Port Type | NPTF |
Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
Intermittent Pressure [Max] | 165 bar |
Mounting Holes | 3/8-16 |
Duty | Standard-Duty |
Seal Material | Viton |
Weight | 11.836 LB |