Product details
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
Specifications
Material | Cast Iron |
Series | H Series |
Mounting Type Code | A |
RPM [Min] | 760 rpm |
Paint Code | A |
Mount Type | 2 Bolt |
Port Location | Side Port |
Torque | 118 Nm |
Port Type | SAE O-Ring |
RPM [Max] | 760 rpm |
Displacement (in³/rev) | 4.5 |
Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
Flange Orientation | Standard |
Shaft Type | Straight w/ Woodruff Key |
Mounting Holes | 0.535 in |
Output Shaft Code | 01 |
Port Size & Location | SAE-10 Side |
Intermittent Pressure [Max] | 165 bar |
Seal Material | Viton |
Inlet Pressure [Max] | 2500 psi |
Mounting Hole Size | 0.54 in |
Paint | Primer Low Gloss Black |
Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
Special Features | None |
Splines | 0 |
Case Drain Code | 1 |
Pilot Diameter | 3.25 in |
Special Features Assembly Code | 0 |
Displacement | 74 cm3/Rev |
Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
Paint/Packaging | Low Gloss Black, Individual Box |
Motor Element | Gerotor |
Flow [Max] | 15 gal/min |
Special Features Hardware Code | AS |
Flow Rate | 57 lpm |
Motor Type | Spool Valve |
Port Code | A |
Port Size | 7/8-14 |
Shaft Size & Type | 1 in x 1/4 in Straight |
Pressure [Max] | 1800 psi |
Bolt Circle Dia. | 4.19 in |
Weight | 1.0 LB |