Product details
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 4 Bolt Mount
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
Specifications
Pilot Diameter | 1.75 in |
Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
Case Drain | None |
Special Features Assembly Code | 0 |
Motor Type | Spool Valve |
Shaft Type | Straight w/ Woodruff Key |
Flow Rate | 57 lpm |
Case Drain Code | 0 |
Displacement | 120 cm3/Rev |
Torque | 192 Nm |
Splines | 0 |
Mount Type | 4 Bolt |
Mounting Type Code | B |
Material | Cast Iron |
Duty | Standard-Duty |
Series | H Series |
Displacement (in³/rev) | 7.32 |
Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
Shaft Size & Type | 1 in x 1/4 in Straight |
Output Shaft Code | 01 |
Intermittent Pressure [Max] | 165 bar |
Corrosion Resistant | No |
Flow [Max] | 15 gal/min |
Port Type | SAE O-Ring |
Paint Code | A |
Bolt Circle Dia. | 3 1/4 in |
Paint | Primer Low Gloss Black |
Seal Material | High Pressure |
Inlet Pressure [Max] | 2500 psi |
Port Location | Side Port |
Motor Element | Gerotor |
Port Size | 7/8-14 |
Mounting Holes | 3/8-16 |
RPM [Max] | 469 rpm |
Port Code | A |
Port Size & Location | SAE-10 Side |
Rotation | Standard Rotation |
Flange Orientation | Standard |
Special Features | None |
Pressure [Max] | 1800 psi |
Paint/Packaging | Low Gloss Black, Individual Box |
Mounting Hole Size | 3/8-16 UNC-2B |
Special Features Hardware Code | DS |
RPM [Min] | 469 rpm |
Weight | 13.0 LB |