Char-Lynn
101-3167-009
H Series Low Speed, High Torque (LSHT) Gerotor Spool Motor
Item #100158747
each
Product details
- H Series Hydraulic Motor
- 15 gal/min
- 8.9 in3
- Shaft: 1 in Straight w/Woodruff Key
- SAE-10 Side Port
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
Specifications
Port Type | SAE O-Ring |
Mount Type | 4 Bolt, 1.75 in Pilot |
Rotation | Reverse Rotation |
Port Code | A |
Corrosion Resistant | No |
Seal Material | Buna-N |
Paint/Packaging | Low Gloss Black, Individual Box |
Shaft Type | Straight w/ Woodruff Key |
Paint Code | A |
Displacement (in³/rev) | 8.9 |
Flange Orientation | Standard |
Series | H Series |
Motor Element | Gerotor |
Mounting Type Code | B |
Case Drain | None |
Pilot Diameter | 1.75 in |
Duty | Standard-Duty |
RPM [Max] | 385 rpm |
Shaft Size & Type | 1 in x 1/4 in Straight |
Bolt Circle Dia. | 3 1/4 in |
Port Size | SAE-10 |
Port Location | Side Port |
Port Size & Location | SAE-10 Side |
Motor Type | Spool Valve |
Pressure [Max] | 1700 psi |
Flow [Max] | 15 gal/min |
Special Features Assembly Code | 1 |
Maximum Speed @ Continuous Flow | 385 rpm @ 15 gal/min |
Output Torque at Rated PSI (inch/pounds) | 1954 in lb |
Splines | 0 |
Special Features | None |
Inlet Pressure [Max] | 2500 psi |
Mounting Holes | 3/8-16 |
Shaft Size | 1 |
Case Drain Code | 0 |
Output Shaft Code | 01 |
Special Features Hardware Code | 00 |
(Catalog) Shaft Type | 1 in x 1/4 in Straight |
Weight | 13.0 LB |