Product details
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Food processing, Machine tools, Harvesters, Seeders
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
footnote
- Low speed valve.
Specifications
Port Type | SAE O-Ring |
Paint/Packaging | Low Gloss Black |
Mounting Hole Size | 0.54 in |
Torque | 372 Nm |
Maximum Speed @ Continuous Flow | 253 rpm @ 15 gal/min |
Special Features | None |
RPM [Max] | 253 rpm |
Rotation | Standard Rotation |
Case Drain | SAE-4 |
Port Code | A |
Flange Orientation | Standard |
Material | Cast Iron |
RPM [Min] | 224 rpm |
Corrosion Resistant | No |
Displacement (in³/rev) | 13.67 |
Mounting Holes | 0.535 in |
Special Features Hardware Code | 00 |
Paint | Primer Low Gloss Black |
Inlet Pressure [Max] | 2500 psi |
Mount Type | 2 Bolt |
Case Drain Code | 1 |
Duty | Standard-Duty |
Motor Type | Spool Valve |
Output Torque at Rated PSI (inch/pounds) | 3290 in lb |
Splines | 6 |
Flow [Max] | 15 gal/min |
Intermittent Pressure [Max] | 374 bar |
Pressure [Max] | 1700 psi |
Shaft Size | 1 |
Port Size & Location | SAE-10 Side |
Port Location | Side Port |
Shaft Size & Type | 1 in - 6T Spline |
Motor Element | Geroler |
(Catalog) Shaft Type | 1 in - 6T Spline |
Pilot Diameter | 3.25 in |
Mounting Type Code | REF! |
Bolt Circle Dia. | 4.187 in |
Special Features Assembly Code | 0 |
Flow Rate | 57 lpm |
Displacement | 224 cm3/Rev |
Shaft Type | Splined |
Paint Code | A |
Port Size | 7/8-14 |
Output Shaft Code | 02 |
Series | S Series |
Seal Material | Buna-N |
Weight | 29.0 LB |