Product details
- Disc Valve Motor
- Cast Iron Material
- Manifold, O-Ring Port
- 2 Bolt Mount
- Spline Output Shaft
applications
- Swing motor, Brush Cutters & mowers, Harvesting equipment
features
- Standard, wheel or bearingless configurations
- Lowest pressure drop motor in the industry
- Highly-efficient Geroler motor provides energy savings
Specifications
Port Location | Side Port |
Rotation | Standard Rotation |
Maximum Speed @ Continuous Flow | 742 rpm @ 20 gal/min |
Inlet Pressure [Max] | 4500 psi |
Case Drain Code | 01 |
Mounting Type Code | AC |
Special Features Hardware Code | 00 |
Output Shaft Code | 07 |
Paint/Packaging | No Paint, Individual Box |
Port Code | AB |
Bolt Circle Dia. | 4.19 in |
Duty | Standard-Duty |
Mount Type | 2 Bolt |
Torque | 295 Nm |
Flange Orientation | Standard |
Displacement | 101.6 cm3/Rev |
Special Features | None |
Seal Material | Buna-N |
Paint Code | 0 |
Accessories Code | 00 |
Special Features Assembly Code | 0 |
Shaft Type | Splined |
Shaft Size & Type | 7/8 in SAE-B 13T Splined |
Series | 2000 Series |
Port Size | Manifold, 3/8-16 UNC Threads |
Mounting Holes | 0.535 in |
RPM [Min] | 742 rpm |
Output Torque at Rated PSI (inch/pounds) | 2630 in lb |
Displacement (in³/rev) | 6.2 |
Port Type | Manifold, O-Ring |
Motor Element | Geroler |
Pilot Diameter | 3.25 in |
Case Drain | SAE-4 |
Motor Type | Disc Valve |
Intermittent Pressure [Max] | 310 bar |
Mounting Hole Size | 0.535 in |
Flow Rate | 75 lpm |
Material | Cast Iron |
Splines | 13 |
Corrosion Resistant | No |
Weight | 42.0 LB |