Product details
- Disc Valve Motor
- Cast Iron Material
- Manifold, O-Ring Port
- 2 Bolt Mount
- Spline Output Shaft
applications
- Swing motor, Brush Cutters & mowers, Harvesting equipment
features
- Standard, wheel or bearingless configurations
- Lowest pressure drop motor in the industry
- Highly-efficient Geroler motor provides energy savings
Specifications
Shaft Type | Splined |
Mount Type | 2 Bolt |
Port Size | Manifold, 3/8-16 UNC Threads |
Accessories Code | 00 |
Corrosion Resistant | No |
Mounting Holes | 0.565 in |
Inlet Pressure [Max] | 4500 psi |
Output Shaft Code | 05 |
Material | Cast Iron |
Duty | Standard-Duty |
Mounting Hole Size | 0.565 in |
Displacement | 393.8 cm3/Rev |
Case Drain | SAE-4 |
Flow Rate | 75 lpm |
Special Features | None |
Paint/Packaging | No Paint, Individual Box |
Motor Element | Geroler |
Bolt Circle Dia. | 5 3/4 in |
Intermittent Pressure [Max] | 170 bar |
Maximum Speed @ Continuous Flow | 191 rpm @ 20 gal/min |
Shaft Size & Type | 1 in SAE-B 6T Splined |
Paint Code | 0 |
Case Drain Code | 01 |
Mounting Type Code | AF |
Port Location | Side Port |
Motor Type | Disc Valve |
Splines | 6 |
Series | 2000 Series |
Flange Orientation | Standard |
Special Features Assembly Code | 0 |
Pilot Diameter | 4 in |
Port Type | Manifold, O-Ring |
Torque | 775 Nm |
Seal Material | Buna-N |
Rotation | Standard Rotation |
Port Code | AB |
RPM [Min] | 191 rpm |
Special Features Hardware Code | 00 |
Displacement (in³/rev) | 24.03 |
Output Torque at Rated PSI (inch/pounds) | 6840 in lb |
Weight | 42.0 LB |