Skip to content Skip to navigation menu


112-1090-006

Cast Iron 4 Bolt Disc Geroler

Item #100153211
each
    Shipment Options

Product details

  • Disc Valve Motor
  • Cast Iron Material
  • 4 Bolt Mount
  • Spline Output Shaft

description

  • When your application calls for a motor with over 100 hp in a tight installation, the 6000 series Char-Lynn® motor can fit your needs. With the flexibility of nine displacements, three mounting styles, and five different output shafts, many applications can utilize this series.

applications

  • Other: Mobile equipment, Snow Removal, Mowing, Spayer, Trencher, Wood products

features

  • Standard, wheel or bearingless configurations
  • Lowest pressure drop motor in the industry
  • Highly-efficient Geroler motor provides energy savings

Specifications

Motor Type Disc Valve
Inlet Pressure [Max] 4500 psi
Duty Standard-Duty
Paint/Packaging Low Gloss Black, Individual Box
Torque 930 Nm
Shaft Type Splined
Flange Orientation Standard
Corrosion Resistant No
Maximum Speed @ Continuous Flow 485 rpm @ 40 gal/min
Rotation Standard Rotation
Displacement (in³/rev) 19.04
Special Features None
Mounting Holes 0.56 in
Pilot Diameter 5 in
Material Cast Iron
Port Code C
Output Shaft Code 03
Case Drain G 1/4 BSP Straight Thread Port With Check Valve
Mounting Hole Size 0.565 in
Port Type BSPP
Splines 17
Paint Primer Low Gloss Black
Output Torque at Rated PSI (inch/pounds) 8231 in lb
Motor Element Geroler
Bolt Circle Dia. 6.38 in
Displacement 312 cm3/Rev
Mounting Type Code B
Flow Rate 150 lpm
Intermittent Pressure [Max] 310 bar
Shaft Size & Type Splined
Port Location Side Port
Special Features Hardware Code 00
Seal Material Buna-N
RPM [Max] 485 rpm
Mount Type 4 Bolt
Paint Code A
RPM [Min] 485 rpm
Series 6000 Series
Geroter/Geroler Options Standard
Port Size 1, G 1
Weight 61.0 LB

Supporting Documents

Close Compare List Open Compare List Toggle

Product Comparison