Skip to content Skip to navigation menu


112-1091-006

Cast Iron 4 Bolt Disc Geroler

Item #100153212
each
    Shipment Options

Product details

  • Disc Valve Motor
  • Cast Iron Material
  • 4 Bolt Mount
  • Spline Output Shaft

description

  • When your application calls for a motor with over 100 hp in a tight installation, the 6000 series Char-Lynn® motor can fit your needs. With the flexibility of nine displacements, three mounting styles, and five different output shafts, many applications can utilize this series.

applications

  • Other: Mobile equipment, Snow Removal, Mowing, Spayer, Trencher, Wood products

features

  • Standard, wheel or bearingless configurations
  • Lowest pressure drop motor in the industry
  • Highly-efficient Geroler motor provides energy savings

Specifications

Port Code C
Port Type BSPP
Paint Primer Low Gloss Black
Splines 17
Series 6000 Series
Mounting Hole Size 0.565 in
Case Drain G 1/4 (BSP) w/Check Valve
Output Shaft Code 03
Flange Orientation Standard
Flow Rate 150 lpm
Displacement 391.7 cm3/Rev
Corrosion Resistant No
Mount Type 4 Bolt
Material Cast Iron
Port Size 1, G 1
Inlet Pressure [Max] 4500 psi
RPM [Min] 387 rpm
Motor Element Geroler
Shaft Size & Type 1.5 in 17T Splined
Port Location Side Port
Pilot Diameter 5 in
Intermittent Pressure [Max] 310 bar
Displacement (in³/rev) 23.9
Mounting Holes 0.56 in
Seal Material Buna-N
Shaft Type Splined
Motor Type Disc Valve
Bolt Circle Dia. 6.38 in
Output Torque at Rated PSI (inch/pounds) 10230 in lb
Special Features None
Paint/Packaging Low Gloss Black
Special Features Hardware Code 00
Paint Code A
Duty Standard-Duty
Maximum Speed @ Continuous Flow 387 rpm @ 40 gal/min
Torque 1155 Nm
Rotation Standard Rotation
Mounting Type Code B
Weight 61.0 LB
Close Compare List Open Compare List Toggle

Product Comparison