Product details
- Disc Valve Motor
- Cast Iron Material
- 4 Bolt Mount
- Taper Output Shaft
applications
- Other: Mobile equipment, Snow Removal, Mowing, Spayer, Trencher, Wood products
features
- Standard, wheel or bearingless configurations
- Lowest pressure drop motor in the industry
- Highly-efficient Geroler motor provides energy savings
Specifications
Rotation | Standard Rotation |
Maximum Speed @ Continuous Flow | 307 rpm @ 40 gal/min |
Output Torque at Rated PSI (inch/pounds) | 12800 in lb |
Port Location | Side Port |
Bolt Circle Dia. | 6.38 in |
Mounting Type Code | B |
Case Drain | G 1/4 (BSP) w/Check Valve |
Flange Orientation | Standard |
Corrosion Resistant | No |
Series | 6000 Series |
Material | Cast Iron |
Special Features Hardware Code | 07 |
Duty | Standard-Duty |
Intermittent Pressure [Max] | 275 bar |
RPM [Min] | 307 rpm |
Displacement | 491.4 cm3/Rev |
Motor Element | Geroler |
Pilot Diameter | 5 in |
Port Type | BSPP |
Paint | Primer Low Gloss Black |
Motor Type | Disc Valve |
Paint/Packaging | Low Gloss Black |
Inlet Pressure [Max] | 4500 psi |
Shaft Type | Tapered |
Port Size | 1, G 1 |
Special Features | None |
Paint Code | A |
Output Shaft Code | 02 |
Mount Type | 4 Bolt |
Seal Material | Viton |
Flow Rate | 150 lpm |
Displacement (in³/rev) | 29.99 |
Mounting Hole Size | 0.565 in |
Shaft Size & Type | 1.75 in Tapered |
Torque | 1445 Nm |
Splines | 0 |
Port Code | C |
Mounting Holes | 0.56 in |
Weight | 61.0 LB |