Product details
- Disc Valve Motor
- Cast Iron Material
- Split Flange Port
- 4 Bolt Mount
- Spline Output Shaft
applications
- Other: Mobile equipment, Snow Removal, Mowing, Spayer, Trencher, Wood products
features
- Standard, wheel or bearingless configurations
- Lowest pressure drop motor in the industry
- Highly-efficient Geroler motor provides energy savings
Specifications
Intermittent Pressure [Max] | 275 bar |
Paint/Packaging | Low Gloss Black |
Special Features Hardware Code | 00 |
Series | 6000 Series |
Port Location | Side Port |
Displacement (in³/rev) | 29.99 |
Torque | 1445 Nm |
Port Type | Split Flange |
Corrosion Resistant | No |
Motor Type | Disc Valve |
Shaft Size & Type | 1.5 in 17T Splined |
Port Code | B |
Flange Orientation | Standard |
Mounting Type Code | B |
Bolt Circle Dia. | 6.38 in |
Splines | 17 |
Paint Code | A |
Pilot Diameter | 5 in |
Rotation | Standard Rotation |
Material | Cast Iron |
Duty | Standard-Duty |
Output Torque at Rated PSI (inch/pounds) | 12800 in lb |
Output Shaft Code | 03 |
RPM [Min] | 307 rpm |
Mounting Hole Size | 0.565 in |
Mount Type | 4 Bolt |
Paint | Primer Low Gloss Black |
Motor Element | Geroler |
Inlet Pressure [Max] | 4500 psi |
Flow Rate | 150 lpm |
Displacement | 491.4 cm3/Rev |
Seal Material | Buna-N |
Special Features | None |
Mounting Holes | 0.56 in |
Case Drain | SAE-4 w/Check Valve |
Maximum Speed @ Continuous Flow | 307 rpm @ 40 gal/min |
Shaft Type | Splined |
Port Size | 3/4 |
Weight | 61.0 LB |