Skip to content Skip to navigation menu


114-1047-006

Cast Iron 4 Bolt Disc Geroler

Item #100155848
each
    Shipment Options

Product details

  • Disc Valve Motor
  • Cast Iron Material
  • 4 Bolt Mount
  • Bearingless Output Shaft

description

  • When your application calls for a motor with over 100 hp in a tight installation, the 6000 series Char-Lynn® motor can fit your needs. With the flexibility of nine displacements, three mounting styles, and five different output shafts, many applications can utilize this series.

applications

  • Other: Mobile equipment, Snow Removal, Mowing, Spayer, Trencher, Wood products

features

  • Standard, wheel or bearingless configurations
  • Lowest pressure drop motor in the industry
  • Highly-efficient Geroler motor provides energy savings

Specifications

Case Drain G 1/4 BSP Straight Thread Port With Check Valve
Special Features None
Material Cast Iron
Corrosion Resistant No
Flange Orientation Standard
Mounting Holes 0.56 in
Bolt Circle Dia. 6.38 in
Series 6000 Series
Intermittent Pressure [Max] 275 bar
Rotation Standard Rotation
Port Code C
Mount Type 4 Bolt
Paint Code A
Port Size 1, G 1
Paint/Packaging Low Gloss Black, Individual Box
Inlet Pressure [Max] 4500 psi
Special Features Hardware Code 00
Shaft Size & Type Bearingless
Motor Element Geroler
Pilot Diameter 5 in
Mounting Hole Size 0.565 in
Torque 1445 Nm
Motor Type Disc Valve
Shaft Type Splined
Paint Primer Low Gloss Black
Displacement 491.4 cm3/Rev
Splines 12
Output Torque at Rated PSI (inch/pounds) 12790 in lb
RPM [Min] 307 rpm
Port Type BSPP
Duty Standard-Duty
Geroter/Geroler Options Standard
Port Location Side Port
Seal Material Buna-N
RPM [Max] 307 rpm
Displacement (in³/rev) 30
Maximum Speed @ Continuous Flow 307 rpm @ 40 gal/min
Flow Rate 150 lpm
Mounting Type Code A
Output Shaft Code 00
Weight 61.0 LB
Close Compare List Open Compare List Toggle

Product Comparison