Product details
- Spool Valve Motor
- Ductile Iron Material
- G 1/2 Prort Size
- BSP Port
- 2 Bolt Mount
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
Specifications
Corrosion Resistant | No |
Material | Ductile Iron |
Motor Element | Gerotor |
Mounting Holes | 0.535 in |
Rotation | Standard Rotation |
Series | T Series |
Mount Type | 2 Bolt |
Inlet Pressure [Max] | 2500 psi |
Shaft Type | Splined |
Paint Code | A |
Motor Type | Spool Valve |
Port Type | BSP |
Paint/Packaging | Low Gloss Black, Individual Box |
Port Size | G 1/2 |
Flange Orientation | Standard |
Intermittent Pressure [Max] | 124 bar |
Mounting Type Code | M |
Maximum Speed @ Continuous Flow | 183 rpm @ 15 gal/min |
Output Torque at Rated PSI (inch/pounds) | 3903.18 in lb |
Pilot Diameter | 3.25 in |
Port Location | Side Port |
RPM [Max] | 183 rpm |
Bolt Circle Dia. | 4.19 in |
RPM [Min] | 183 rpm |
Splines | 6 |
Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
Displacement | 306 cm3/Rev |
Duty | Standard-Duty |
Special Features Assembly Code | 0 |
Shaft Size & Type | Splined |
Torque | 441 Nm |
Output Shaft Code | 49 |
Port Code | E |
Special Features Hardware Code | 00 |
Paint | Primer Low Gloss Black |
Special Features | None |
Flow Rate | 57 lpm |
Seal Material | Buna-N |
Mounting Hole Size | 0.54 in |
Case Drain Code | 2 |
Displacement (in³/rev) | 18.7 |
Weight | 15.0 LB |