Product details
- Spool Valve Motor
- Ductile Iron Material
- Manifold, O-Ring Port
- 2 Bolt Mount
- Spline Output Shaft
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
Specifications
Paint Code | A |
Seal Material | Buna-N |
Motor Type | Spool Valve |
Pilot Diameter | 3.25 in |
Intermittent Pressure [Max] | 190 bar |
Special Features | None |
Mounting Type Code | A |
Series | T Series |
Mounting Holes | 0.535 in |
Bolt Circle Dia. | 4.187 in |
Rotation | Standard Rotation |
Mounting Hole Size | 0.54 in |
Splines | 6 |
Displacement | 49 cm3/Rev |
Special Features Hardware Code | 00 |
Material | Ductile Iron |
Maximum Speed @ Continuous Flow | 906 rpm @ 12 gal/min |
Mount Type | 2 Bolt |
Case Drain | G 1/4 (BSP) |
RPM [Min] | 906 rpm |
Motor Element | Geroler |
Flow Rate | 45 lpm |
Corrosion Resistant | No |
Port Code | D |
RPM [Max] | 906 rpm |
Flange Orientation | Standard |
Port Location | Side Port |
Case Drain Code | 2 |
Special Features Assembly Code | 0 |
Inlet Pressure [Max] | 2500 psi |
Port Type | Manifold, O-Ring |
Shaft Size & Type | 1 in Splined |
Port Size | Manifold, M8 x 1.25 Threads, M8 X 1.25-6H |
Torque | 105 Nm |
Shaft Type | Splined |
Paint | Primer Low Gloss Black |
Duty | Standard-Duty |
Output Torque at Rated PSI (inch/pounds) | 928 in lb |
Paint/Packaging | Low Gloss Black |
Displacement (in³/rev) | 2.99 |
Output Shaft Code | 02 |
Weight | 15.0 LB |