Skip to content Skip to navigation menu


Single-Acting Spring Return Hydraulic Cylinder

Item #100189791
    Shipment Options

Product details

  • 2.95 in Bore Size
  • 1.97 in Stroke


  • Composite bearings prevent metal-to-metal contact, increasing cylinder life and resistance to side-loads of up to 10%
  • Hard coat finish on all surfaces resists damage and extends cylinder life
  • Handles included on all models 30 Tons and above
  • For protection against load-induced damage, a saddle is standard on all models and a steel baseplate is standard on models 20-ton and above.
  • Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
  • High-strength return spring for rapid cylinder retraction
  • CR-400 coupler and dust cap included on all models
  • All cylinders meet ASME B-30.1 standards


  • CR-400 Coupler, Dust Cap


Operating Pressure [Max] 700 bar, 10000 psi
Type Spring Return
Collapsed Height 7.13 in
Plunger Diameter 2.36 in
Activating Fluid Oil
Oil Capacity 13.48 in3
Series RAC
Cylinder Effective Area 6.85 in2
Bore Size 2.95 in, 75 mm
Body Material Aluminum
Stroke Range 1.0 to 1.99 in, 48 to 94 mm
Plunger Type Solid
Base Mounting Holes Thread Depth 12 mm
Optional Tilt Saddle Addition To Collapsed Height 0.43 in, 11 mm
Cylinder Class 30 Tons
Base Mounting Holes Bolt Circle 3.15 in, 80 mm
Cylinder Capacity Advance [MAX] 34.2 Tons, 309 kN
Optional Tilt Saddle Diameter 2.17 in
Saddle Protrusion From Plunger 0.12 in
Base Mounting Holes Thread M6
Action Single-Acting
Surface Treatment Anodized
Operating Pressure Ranges [MAX] 10000 psi
Base To Advance Port 1.31 in, 32 mm
Saddle Maximum Tilt Angle Radius 5 degrees
Weight 18.7 LB
EAN or UPC 662005125739
Close Compare List Open Compare List Toggle

Product Comparison