Skip to content Skip to navigation menu


RAC502

Single-Acting Spring Return Hydraulic Cylinder

Item #100189793
each
    Shipment Options

Product details

  • 3.74 in Bore Size
  • 1.97 in Stroke

features

  • Composite bearings prevent metal-to-metal contact, increasing cylinder life and resistance to side-loads of up to 10%
  • Hard coat finish on all surfaces resists damage and extends cylinder life
  • Handles included on all models 30 Tons and above
  • For protection against load-induced damage, a saddle is standard on all models and a steel baseplate is standard on models 20-ton and above.
  • Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
  • High-strength return spring for rapid cylinder retraction
  • CR-400 coupler and dust cap included on all models
  • All cylinders meet ASME B-30.1 standards

includes

  • CR-400 Coupler, Dust Cap

Specifications

Plunger Diameter 3.15 in
Oil Capacity 21.63 in3
Cylinder Effective Area 10.99 in2
Type Spring Return
Operating Pressure [Max] 700 bar, 10000 psi
Series RAC
Collapsed Height 7.32 in
Activating Fluid Oil
Plunger Type Solid
Cylinder Class 50 Tons
Stroke Range 1.0 to 1.99 in, 48 to 94 mm
Body Material Aluminum
Base Mounting Holes Bolt Circle 4.33 in, 110 mm
Operating Pressure Ranges [MAX] 10000 psi
Base Mounting Holes Thread M6
Bore Size 3.74 in, 95 mm
Base To Advance Port 1.19 in, 30 mm
Saddle Maximum Tilt Angle Radius 5 degrees
Cylinder Capacity Advance [MAX] 54.9 Tons, 496 kN
Optional Tilt Saddle Diameter 2.8 in
Action Single-Acting
Saddle Protrusion From Plunger 0.12 in, 24 mm
Optional Tilt Saddle Addition To Collapsed Height 0.55 in, 14 mm
Base Mounting Holes Thread Depth 12 mm
Surface Treatment Anodized
Weight 25.7 LB
EAN or UPC 662005125760
Close Compare List Open Compare List Toggle

Product Comparison