Skip to content Skip to navigation menu


2102974

Red 25 ml Gel Gasket Sealant

Item #112690419
each
    Shipment Options
  • No Air ShippingNo Air Shipping

Product details

  • 25 ml Container

description

  • LOCTITE® 518 cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. LOCTITE 518 fills gaps up to 0.25mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and motor housings.

applications

  • Fills gaps up to 0.050" (1.27 mm)
  • Can be used on a variety of metal surfaces, including aluminum
  • Gearboxes and engine casings

features

  • Semi-flexible, medium-strength anaerobic flange gasket
  • For active and inactive rigid metal flanges
  • Cures through minor surface contamination
  • Adapts to flange surface irregularities and gaps up to 0.25 mm
  • Gel-type consistency
  • Seals instantly against low pressure
  • Reduces inventory costs – no need for large inventory of cut gaskets
  • Resists high pressure when fully cured
  • No compression set or misaligned gaskets
  • Easy to automate
  • Reduces process costs – eliminates manual assembly of conventional gaskets
  • NSF P1 Reg. No. 123758

compliances

  • 0

Specifications

Cure Speed (Unprimed) 24 h
Viscosity 750000 mPa·s (cP)
Container Type Syringe
Assembly Type Flexible
Container Size 25 ml
Cured State Flexible
Gap Fill (Unprimed) 0.25 mm
Viscosity (cP) 800,000/3,750,000 Thixotropic
Application Metal
Operating Temperature [Max] 300 °F, 150 °C
Operating Temperature [Min] -65 °F, -55 °C
Color Red
Type 518
Gasket Type Anaerobic
Gap Fill (Primed) 0.05 in
Recommended Primer Primer N™
Temperature Range [Max] 300 °F
Physical Form Gel
Temperature Range [Min] -65 °F
Cure Speed (Primed) 4 h
Weight 0.34 LB
EAN or UPC 79340010895

Compliance & Restrictions

  • No Air ShippingNo Air Shipping
Close Compare List Open Compare List Toggle

Product Comparison