Skip to content Skip to navigation menu
Steel 1.18 in ID Deep Groove Ball Bearing

62062RSC3

Steel 1.18 in ID Deep Groove Ball Bearing
Item #102092061
  • 1.18 in Inner Diameter
  • 2.44 in Outer Diameter
  • Deep Groove Bearing
  • 0.63 in Overall Width
  • Steel Bearing
  • Single Row
  • Straight OD
+ Show More + Show Less
Steel 1.18 in ID Deep Groove Ball Bearing
    Shipment Options
  • 1.18 in Inner Diameter
  • 2.44 in Outer Diameter
  • Deep Groove Bearing
  • 0.63 in Overall Width
  • Steel Bearing

features

  • Best used for moderate radial and low axial load applications
  • Made from premium high carbon, high chromium Japanese steel
  • Available with steel (no callout) or brass (FY) cage
  • Available with seals (2RD, 2RS, 2RU), shields (ZZ), open and/or with a snap ring (NR) options
  • All double sealed and double shielded product come with Polyrex XM Grease
  • The 2RD Seal is used for high speed and/or reduced drag applications in addition to applications that require maximum sealing ability
  • Available in miniature (EE) inch product
  • Available with cermamic balls (3NCH or 3NC in prefix)
  • Available in max capacity/special heat treat (RSH2 in suffix)
Precision Class Class 0
Capacity Standard Capacity
Cage Material Steel
Internal Clearance C3
Outer Ring Width 16 mm
Static Load Rating [Max] 2540 lbf
Width 16.000 mm
Radial Internal Clearance Specification Greater Than Normal Clearance
Bearing Type Deep Groove
No. in Set Single Bearing
O.D. Type Straight
Self Aligning No
Component Assembly
Operating Temperature [Max] 212 ˚F
Rows of Balls Single
Limiting Speed - Grease 11000 rpm
Temperature Range [Min] -22 °F
Inner Ring Width 16 mm
Precision Level Standard (ABEC 1)
Overall Width 0.63 in, 16 mm
Precision Standard
Dynamic Load Rating 24.3 kN
I.D. 1.18 in, 30 mm
Bearing Material Steel
Lubricant Grease
icNumber 7695849
Preload Level None
Series 6200
Material Steel
Seal Material Rubber
Radial Internal Clearance C3
O.D. 2.44 in, 62 mm
Fillet Radius 0.04 in, 1 mm
Static Load Rating 11.3 kN
Relubricatable No
Inch/Metric Metric Bore
Bore Type Round
Contact Angle
Seal Type Contact Seals
Limiting Speed - Sealed 7000 rpm
Rolling Element Ball
Rolling Element Material High Carbon Chromium Bearing Steel
Origin Single Row Radial
Enclosure Double Sealed
Cage Type Riveted
Ball Material Steel
Snap Ring No Snap Ring
Temperature Range [Max] 212 °F
Locking Device No Locking Device
Operating Temperature [Min] -22 ˚F
Speed (Max) Grease 7000 rpm
Limiting Speed - Oil 13000 rpm
Weight 0.454 LB
EAN or UPC 605790407840
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison