Skip to content Skip to navigation menu
Tapmatic® AquaCut Cutting Fluid

01205

Tapmatic® AquaCut Cutting Fluid
Item #102100347
  • Pail Container
  • 5 gal Net Fill
Tapmatic® AquaCut Cutting Fluid
    Shipment Options
  • Pail Container
  • 5 gal Net Fill

description

  • A water-based cutting fluid that does not contain sulfur, chlorine, or chlorinated solvents.

applications

  • Boring | Broaching | Drawing | Drilling | Engraving | Facing | Grinding | Finishing | Stamping | Tapping | Threading | Turning | Milling | Sawing

features

  • Corrosion inhibitors prevent flash rusting
  • Safe on all metals, except magnesium
  • Does not contain sulfur, chlorine, or oils
  • Non-hazardous
  • Non-flammable
  • Excellent in applications where cooling of the tool is desired
  • Water-based formula
  • Provides fine finishes
  • Specifications :- Caterpillar | Ford Motor Co. | General Motors Co.
Color Blue Green
Net Fill 5 gal, 18.93 L
Auto-Ignition Temperature Greater Than 33.8 °F
Container Size 5 gal
VOC Content 0 % Per US State and Federal Consumer Product Regulations CARB
Boiling Point 212 °F
Odor Cinnamon
Partition Coefficient Less Than 1
Physical State Liquid
Percent Volatile 0.95
Vapor Pressure 18 mmHg @ 68°F
Flash Point N/A
Specific Gravity 0.99 to 1.01 @ 68 °F
Evaporation Rate 1 (Water = 1)
Shelf Life 3 Years
Container Type Pail
Vapor Density ~ 0.6
Weight 47.0 LB
EAN or UPC 78827012056
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison