Skip to content Skip to navigation menu


HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100760916
    Shipment Options

Alternate Products

Product details

  • Single Row Radial Bearing
  • 17 mm ID x 40 mm OD x 12 mm Wide
  • C3 Clearance
  • Double Sealed


  • Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.


  • Transmissions
  • Electric motors and generators
  • Electrical appliances
  • Pumps and compressors
  • Blowers and fans
  • Speed changers
  • Gearboxes and drives
  • Woodworking machinery
  • Lawn and garden equipment
  • Turbines
  • Farm machinery
  • Construction machinery
  • Oil field machinery
  • Elevators
  • Conveying equipment
  • Hoists and cranes
  • Power hand tools
  • Industrial valves
  • Rolling mill machinery
  • Textile machinery
  • Paper machinery
  • Printing machinery
  • Food products machinery
  • Packaging machinery
  • Industrial clutches
  • Slip joints


  • Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
  • For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
  • The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
  • If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing


Contact Angle
Seal Type Contact Seals
I.D. 17 mm
Static Load Rating [Max] 1,080.00 lbf
Lubricant Mul-Temp SRL
Bore Type Round Bore
Material Steel
Radial Internal Clearance Specification Greater Than Normal Clearance
Corner Radius [Min] 0.60 mm
Width 12 mm
Outer Ring Width 12 mm
Locking Device No Locking Device
Capacity Standard Capacity
O.D. 40.0000 mm
Ball Material Steel
Precision Level Standard (ABEC 1)
icNumber 7695847
Seal Material Buna-N
Inch/Metric Metric Bore
Enclosure Double Sealed
O.D. Type Straight
Cage Type Metal
Inner Ring Width 12 mm
Cage Material Pressed Steel
Dynamic Load Rating 2,147.00 lbf
Precision Standard
Radial Internal Clearance C3
Preload Level None
Bearing Type Radial
Limiting Speed - Oil 20000 rpm
Snap Ring No Snap Ring
No. in Set Single Bearing
Rows of Balls Single
Limiting Speed - Grease 12000 rpm
Weight 0.143 LB
EAN or UPC 29176064104
Close Compare List Open Compare List Toggle

Product Comparison