text.skipToContent text.skipToNavigation


HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100761066
    Shipment Options

Product details

  • Single Row Radial Bearing
  • 30 mm ID x 62 mm OD x 16 mm Wide
  • C3 Clearance
  • Double Sealed


  • Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.


  • Transmissions
  • Electric motors and generators
  • Electrical appliances
  • Pumps and compressors
  • Blowers and fans
  • Speed changers
  • Gearboxes and drives
  • Woodworking machinery
  • Lawn and garden equipment
  • Turbines
  • Farm machinery
  • Construction machinery
  • Oil field machinery
  • Elevators
  • Conveying equipment
  • Hoists and cranes
  • Power hand tools
  • Industrial valves
  • Rolling mill machinery
  • Textile machinery
  • Paper machinery
  • Printing machinery
  • Food products machinery
  • Packaging machinery
  • Industrial clutches
  • Slip joints


  • Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
  • For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
  • The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
  • If very small bearing loads are expected, please contact Applied� for selection of an appropriate bearing


  • Limiting speeds are lower with contact seals. For more information, contact your local Applied® service center.


Bore Type Round Bore
Seal Type Contact Seals
icNumber 7695849
Capacity Standard Capacity
Radial Internal Clearance C3
Outer Ring Width 16 mm
I.D. 30 mm
Radial Internal Clearance Specification Greater Than Normal Clearance
Rows of Balls Single
Corner Radius [Min] 1.00 mm
Snap Ring No Snap Ring
Material Steel
Cage Material Pressed Steel
Dynamic Load Rating 4,384.00 lbf
O.D. Type Straight
Seal Material Buna-N
No. in Set Single Bearing
Inch/Metric Metric Bore
Precision Standard
Inner Ring Width 16 mm
Limiting Speed - Grease 7500 rpm
Lubricant Mul-Temp SRL
Static Load Rating [Max] 2,540.00 lbf
Enclosure Double Sealed
Bearing Type Radial
O.D. 62.0000 mm
Precision Level Standard (ABEC 1)
Preload Level None
Ball Material Steel
Contact Angle
Locking Device No Locking Device
Cage Type Metal
Limiting Speed - Oil 13000 rpm
Weight 0.43 LB
EAN or UPC 29176064289

Supporting Documents

You May Also Like

Close Compare List Open Compare List Toggle

Product Comparison