Skip to content Skip to navigation menu


713-30-G

700 Series Standard Reducer

Item #101810887
each
    Shipment Options

Product details

  • 1.330" Center Distance
  • 30:1 Ratio
  • Shaft Input
  • Left Output
  • Universal Worm Position

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Periodic inspection is required to determine if the unit is in proper working order by inspecting and replacing the urethane seal, inspecting to see if material buildup has occurred and ensuring proper adjustment and tightness of all adjustable bolts.
  • The Guardian™ is designed to help minimize the potential for danger but cannot guarantee protection in all situations or applications.

Specifications

Box Length 4 1/4 in
Max. Thrust Load @ RPM 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm
Frame Size Shaft Input, Not a C-Face
Worm Position Universal
Bolt Center 4 3/8 in x 3 5/16 in
Bolt Center Length x Bolt Center Width 4 3/8 in x 3 5/16 in
Base to Shaft Center Height w/Vert. "J" Base Kit 2.94 in
Base to Centerline of Output Shaft 1 23/32 in
Torque Out @ 1750 rpm 311 in lb
Output (Shaft or Bore) Size 5/8 in
Lubrication None
Bolt Centers w/ Vertical Base Kits (in) 6.16 x 3.25
Shaft Assembly Code G
Base to Shaft Center Height w/Std. Base Kit 3.47 in
Family Name Std Unit
Ratio 30:1
Washdown Duty No
Torque Out @ 1150 rpm 270 in lb
Input Configuration Shaft Input
Base to Centerline of Input Shaft 3 3/64 in
Base to Shaft Center Height w/High Vert. Base Kit 3.56 in
Max. Input HP @ 100 rpm 0.029 hp
Center Distance 1.33 in
Box Height 4 21/32 in
Reduction Type Single Reduction
Frame N/A
Max. Thrust Load @ 1150 rpm 300 lb/in
Box Width 2 7/8 in
Thermal Input Horsepower @ 1750 RPM N/A
Use With 713
Output RPM @ 1750 rpm Input 58.33 rpm
Input (Shaft or Bore) Size 1/2 in
Input HP @ RPM 0.21 hp @ 1150 rpm, 0.39 hp @ 1750 rpm
Housing Material Cast Iron
Max. Overhung Load @ 1750 rpm 200 lb/in
Bolt Centers w/ Vertical "J" Base Kit (in) 6.41 x 2.00
Output Torque @ RPM 270 in lb @ 1150 rpm, 311 in lb @ 1750 rpm
Fan Cooled No
Base to Shaft Center Height w/Low Vert. Base Kit 2.31 in
HP @ RPM 0.1666667 hp @ 1200 rpm, 0.25 hp @ 1800 rpm
Output Configuration Left Output
Max. Overhung Load @ RPM 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm
Output RPM @ Input RPM 58 rpm @ 1750 rpm
Motor Application General Purpose
Bolt Centers w/ Std. Base Kit (in) 4 3/8 x 3 5/16
Weight 11.1 LB
EAN or UPC 781711516218
Close Compare List Open Compare List Toggle

Product Comparison