Skip to content Skip to navigation menu


F713-15-B5-G

700 Series C-Face Quilled Reducer

Item #101805899
each
    Shipment Options

Product details

  • 1.330" Center Distance
  • 15:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life
  • Must be filled to the proper level with the recommended lubricant for your application before operation

Specifications

Input (Shaft or Bore) Size 5/8 in
Box Length 4 1/4 in
Base to Shaft Center Height w/Std. Base Kit 3.47 in
Max. Thrust Load @ 1150 rpm 300 lb/in
Output RPM @ 1750 rpm Input 117 rpm
Motor Application General Purpose
Output (Shaft or Bore) Size 5/8 in
Base to Centerline of Output Shaft 1.72 in
Bore Code B5
Fan Cooled No
Bolt Pattern 3.25 x 2
Washdown Duty No
HP @ RPM 0.5 hp @ 1800 rpm, 0.3333333 hp @ 1200 rpm
Bolt Center 3 1/4" x 2"
Box Height 4 21/32 in
Frame 56C
Base No
Ratio 15:1
Output Torque @ RPM 305 in lb @ 1750 rpm, 262 in lb @ 1150 rpm
Center Distance 1.33 in
Shaft Assembly Code G
Input HP @ RPM 0.66 hp @ 1750 rpm, 0.37 hp @ 1150 rpm
Output RPM @ Input RPM 117 rpm @ 1750 rpm
Max. Input HP @ 100 rpm 0.049 hp
Base to Shaft Center Height w/Low Vert. Base Kit 2.31 in
Base to Shaft Center Height w/Vert. "J" Base Kit 2.94 in
Output Configuration Left Output
Max. Thrust Load @ RPM 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm
Max. Overhung Load @ RPM 200 lb/in @ 1750 rpm, 200 lb/in @ 1150 rpm
Motor HP 1/2 hp
Use With 713
Bolt Centers w/ Vertical "J" Base Kit (in) 6.41 x 2.00
Torque Out @ 1750 rpm 305 in lb
Box Width 4.03 in
Lubrication None
Reduction Type Single Reduction
Frame Size 56C
Family Name F
Housing Material Cast Iron
Bolt Center Length x Bolt Center Width 3 1/4 in x 2 in
Base to Shaft Center Height w/High Vert. Base Kit 3.56 in
Worm Position Universal
Input Configuration C-Face Quilled
Bolt Centers w/ Std. Base Kit (in) 4 3/8 x 3 5/16
Bolt Centers w/ Vertical Base Kits (in) 6.16 x 3.25
Base to Centerline of Input Shaft 3 1/16 in
Torque Out @ 1150 rpm 262 in lb
Max. Overhung Load @ 1750 rpm 200 lb/in
Weight 13.1 LB
EAN or UPC 781711518762
Close Compare List Open Compare List Toggle

Product Comparison