Skip to content Skip to navigation menu


F715-30-B5-G

700 Series C-Face Quilled Reducer

Item #101805904
each
    Shipment Options

Product details

  • 1.540" Center Distance
  • 30:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life
  • Must be filled to the proper level with the recommended lubricant for your application before operation

Specifications

Torque Out @ 1150 rpm 388 in lb
Bolt Center Length x Bolt Center Width 4 3/16 in x 2 3/4 in
Output (Shaft or Bore) Size 3/4 in
Motor Application General Purpose
Worm Position Universal
Output Configuration Left Output
Box Height 5 3/8 in
Max. Overhung Load @ 1750 rpm 300 lb/in
Box Length 5 1/8 in
Max. Overhung Load @ RPM 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm
Max. Input HP @ 100 rpm 0.04 hp
Fan Cooled No
Bolt Pattern 4 3/16 x 2 3/4
Reduction Type Single Reduction
Center Distance 1.54 in
HP @ RPM 0.3333333 hp @ 1800 rpm, 0.25 hp @ 1200 rpm
Input HP @ RPM 0.54 hp @ 1750 rpm, 0.31 hp @ 1150 rpm
Max. Thrust Load @ RPM 400 lb/in @ 1750 rpm, 400 lb/in @ 1150 rpm
Washdown Duty No
Frame 56C
Bore Code B5
Base to Shaft Center Height w/Std. Base Kit 4.06 in
Motor HP 0.3333 hp
Box Width 5 1/16 in
Bolt Centers w/ Std. Base Kit (in) 5 1/4 x 4 5/16
Housing Material Cast Iron
Max. Thrust Load @ 1150 rpm 400 lb/in
Ratio 30:1
Family Name F
Output RPM @ Input RPM 58 rpm @ 1750 rpm
Lubrication None
Frame Size 56C
Base to Shaft Center Height w/Vert. "J" Base Kit 3 1/2 in
Base to Centerline of Input Shaft 3 7/16 in
Base to Shaft Center Height w/Low Vert. Base Kit 3 in
Bolt Center 4 3/16 in x 2 3/4 in
Input (Shaft or Bore) Size 5/8 in
Base to Centerline of Output Shaft 1.91 in
Shaft Assembly Code G
Base No
Output RPM @ 1750 rpm Input 58 rpm
Input Configuration C-Face Quilled
Output Torque @ RPM 446 in lb @ 1750 rpm, 388 in lb @ 1150 rpm
Torque Out @ 1750 rpm 446 in lb
Use With 715
Bolt Centers w/ Vertical Base Kits (in) 6.97 x 4.00
Bolt Centers w/ Vertical "J" Base Kit (in) 7.25 x 2.50
Base to Shaft Center Height w/High Vert. Base Kit 4.38 in
Weight 17.1 LB
EAN or UPC 781711519127
NSN Number 6105-01-360-9620
Close Compare List Open Compare List Toggle

Product Comparison