Skip to content Skip to navigation menu


F718-20-B5-G

700 Series C-Face Quilled Reducer

Item #102083209
each
    Shipment Options

Product details

  • 1 3/4" Center Distance
  • 20:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life
  • Must be filled to the proper level with the recommended lubricant for your application before operation

Specifications

Output RPM @ 1750 rpm Input 88 rpm
Output Torque @ RPM 590 in lb @ 1750 rpm, 525 in lb @ 1150 rpm
Input Configuration C-Face Quilled
Washdown Duty No
Reduction Type Single Reduction
Bolt Centers w/ Vertical "J" Base Kit (in) 7.63 x 2.50
Family Name F
Output (Shaft or Bore) Size 7/8 in
Ratio 20:1
Box Width 5 1/32 in
Max. Overhung Load @ RPM 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm
HP @ RPM 0.75 hp @ 1800 rpm
Base to Shaft Center Height w/High Vert. Base Kit 4.38 in
Bore Code B5
Motor Application General Purpose
Box Height 5 3/4 in
Base to Shaft Center Height w/Low Vert. Base Kit 3 in
Housing Material Cast Iron
Input HP @ RPM 0.97 hp @ 1750 rpm, 0.58 hp @ 1150 rpm
Base to Centerline of Input Shaft 3 13/16 in
Bolt Centers w/ Std. Base Kit (in) 5 3/4 x 4 1/2
Worm Position Universal
Output Configuration Left Output
Output RPM @ Input RPM 88 rpm @ 1750 rpm
Base to Centerline of Output Shaft 2 1/16 in
Bolt Centers w/ Vertical Base Kits (in) 7.38 x 4.00
Base to Shaft Center Height w/Std. Base Kit 4.38 in
Torque Out @ 1750 rpm 590 in lb
Input (Shaft or Bore) Size 5/8 in
Bolt Pattern 4 3/16 x 2 3/4
Frame Size 56C
Lubrication None
Use With 718
Bolt Center 4 3/16 in x 2 3/4 in
Max. Overhung Load @ 1750 rpm 500 lb/in
Bolt Center Length x Bolt Center Width 4 3/16 in x 2 3/4 in
Max. Input HP @ 100 rpm 0.08 hp
Center Distance 1 3/4 in
Torque Out @ 1150 rpm 525 in lb
Base No
Fan Cooled No
Max. Thrust Load @ RPM 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm
Box Length 5 1/2 in
Motor HP 3/4 hp
Shaft Assembly Code G
Max. Thrust Load @ 1150 rpm 500 lb/in
Frame 56C
Base to Shaft Center Height w/Vert. "J" Base Kit 3 1/2 in
Weight 19.1 LB
EAN or UPC 781711519332
Close Compare List Open Compare List Toggle

Product Comparison