Skip to content Skip to navigation menu


F721-10-B5-G

700 Series C-Face Quilled Reducer

Item #101734239
each
    Shipment Options

Product details

  • 2 1/16" Center Distance
  • 10:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Should not be used in place of standard angular contact spindle bearings.

Specifications

Box Width 5 3/16 in
Ratio 10:1
Output Torque @ RPM 725 in lb @ 1150 rpm, 789 in lb @ 1750 rpm
Fan Cooled No
Base No
Max. Thrust Load @ 1150 rpm 700 lb/in
Thermal Input Horsepower @ 1750 RPM N/A
Washdown Duty No
Frame 56C
Base to Shaft Center Height w/Vert. "J" Base Kit 3.94 in
Bolt Center Length x Bolt Center Width 5 in x 2 7/8 in
Base to Shaft Center Height w/High Vert. Base Kit 4.88 in
Max. Overhung Load @ 1750 rpm 700 lb/in
Input (Shaft or Bore) Size 5/8 in
Frame Size 56C
Max. Input HP @ 100 rpm 0.19 hp
Base to Shaft Center Height w/Low Vert. Base Kit 3.13 in
Reduction Type Single Reduction
Motor HP 1 hp
Input HP @ RPM 1.49 hp @ 1150 rpm, 2.34 hp @ 1750 rpm
Motor Application General Purpose
Output RPM @ 1750 rpm Input 175 rpm
Family Name F
Bore Code B5
Torque Out @ 1750 rpm 789 in lb
HP @ RPM 2 hp @ 1800 rpm
Bolt Center 5 in x 2 7/8 in
Box Height 6 3/8 in
Bolt Centers w/ Vertical Base Kits (in) 8 3/8 x 4 7/8
Output (Shaft or Bore) Size 1 in
Torque Out @ 1150 rpm 725 in lb
Box Length 6 in
Input Configuration C-Face Quilled
Housing Material Cast Iron
Base to Shaft Center Height w/Std. Base Kit 4.81 in
Max. Thrust Load @ RPM 700 lb/in @ 1150 rpm, 700 lb/in @ 1750 rpm
Bolt Centers w/ Std. Base Kit (in) 6 3/8 x 4 11/16
Use With 721
Worm Position Universal
Center Distance 2 1/16 in
Max. Overhung Load @ RPM 700 lb/in @ 1150 rpm, 700 lb/in @ 1750 rpm
Bolt Centers w/ Vertical "J" Base Kit (in) 8.63 x 2.63
Output Configuration Left Output
Base to Centerline of Output Shaft 2.28 in
Output RPM @ Input RPM 175 rpm @ 1750 rpm
Base to Centerline of Input Shaft 4 11/32 in
Shaft Assembly Code G
Lubrication None
Weight 24.1 LB
EAN or UPC 781711519547
Close Compare List Open Compare List Toggle

Product Comparison