Skip to content Skip to navigation menu


F721-30-B5-G

700 Series C-Face Quilled Reducer

Item #101834489
each
    Shipment Options

Product details

  • 2 1/16" Center Distance
  • 30:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life
  • Must be filled to the proper level with the recommended lubricant for your application before operation

Specifications

Family Name F
Max. Thrust Load @ 1150 rpm 700 lb/in
Use With 721
Box Length 6 in
Housing Material Cast Iron
Bolt Centers w/ Vertical Base Kits (in) 8 3/8 x 4 7/8
Motor HP 3/4 hp
Center Distance 2 1/16 in
Base No
Base to Centerline of Input Shaft 4 11/32 in
Max. Overhung Load @ 1750 rpm 700 lb/in
Bolt Pattern 5 x 2.88
Base to Centerline of Output Shaft 2.28 in
Box Height 6 3/8 in
HP @ RPM 0.75 hp @ 1800 rpm
Output Configuration Left Output
Output Torque @ RPM 871 in lb @ 1750 rpm, 795 in lb @ 1150 rpm
Output RPM @ Input RPM 58 rpm @ 1750 rpm
Bolt Centers w/ Vertical "J" Base Kit (in) 8.63 x 2.63
Torque Out @ 1150 rpm 795 in lb
Max. Input HP @ 100 rpm 0.086 hp
Frame 56C
Base to Shaft Center Height w/High Vert. Base Kit 4.88 in
Torque Out @ 1750 rpm 871 in lb
Bolt Center Length x Bolt Center Width 5 in x 2 7/8 in
Base to Shaft Center Height w/Std. Base Kit 4.81 in
Output RPM @ 1750 rpm Input 58 rpm
Lubrication None
Max. Overhung Load @ RPM 700 lb/in @ 1750 rpm, 700 lb/in @ 1150 rpm
Washdown Duty No
Fan Cooled No
Reduction Type Single Reduction
Motor Application General Purpose
Max. Thrust Load @ RPM 700 lb/in @ 1750 rpm, 700 lb/in @ 1150 rpm
Output (Shaft or Bore) Size 1 in
Bolt Centers w/ Std. Base Kit (in) 6 3/8 x 4 11/16
Worm Position Universal
Bolt Center 5 in x 2 7/8 in
Input (Shaft or Bore) Size 5/8 in
Ratio 30:1
Input HP @ RPM 0.99 hp @ 1750 rpm, 0.62 hp @ 1150 rpm
Frame Size 56C
Base to Shaft Center Height w/Vert. "J" Base Kit 3.94 in
Input Configuration C-Face Quilled
Box Width 5 3/16 in
Bore Code B5
Base to Shaft Center Height w/Low Vert. Base Kit 3.13 in
Shaft Assembly Code G
Weight 24.1 LB
EAN or UPC 781711519691
Close Compare List Open Compare List Toggle

Product Comparison