Skip to content Skip to navigation menu
700 Series C-Face Quilled Reducer

F726-40-B5-G

700 Series C-Face Quilled Reducer
Item #101856459
  • 2 5/8" Center Distance
  • 40:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output
  • Universal Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
700 Series C-Face Quilled Reducer
    Shipment Options
  • 2 5/8" Center Distance
  • 40:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life
  • Must be filled to the proper level with the recommended lubricant for your application before operation
Fan Cooled No
Bolt Centers w/ Vertical Base Kits (in) 10.13 x 5.75
Torque Out @ 1150 rpm 1500 in lb
Max. Input HP @ 100 rpm 0.14 hp
Input Configuration C-Face Quilled
Motor HP 1 hp
Max. Overhung Load @ 1750 rpm 1000 lb/in
Bolt Pattern 6.38 x 3.38
Base to Shaft Center Height w/Std. Base Kit 5.81 in
Bore Code B5
Shaft Assembly Code G
Output (Shaft or Bore) Size 1 1/8 in
Box Width 5.9 in
Box Height 8 in
Worm Position Universal
Bolt Centers w/ Vertical "J" Base Kit (in) 10.38 x 3.13
Base to Shaft Center Height w/Vert. "J" Base Kit 4 3/4 in
Output RPM @ Input RPM 44 rpm @ 1750 rpm
Max. Thrust Load @ 1150 rpm 900 lb/in
Max. Overhung Load @ RPM 1000 lb/in @ 1750 rpm, 1000 lb/in @ 1150 rpm
Reduction Type Single Reduction
Ratio 40:1
Bolt Center Length x Bolt Center Width 6 3/8 in x 3 3/8 in
Base to Centerline of Output Shaft 2 15/16 in
Base to Centerline of Input Shaft 5 9/16 in
Input (Shaft or Bore) Size 5/8 in
Base to Shaft Center Height w/Low Vert. Base Kit 3.63 in
Family Name F
Bolt Centers w/ Std. Base Kit (in) 8 x 5 1/4
Torque Out @ 1750 rpm 1512 in lb
HP @ RPM 1 hp @ 1800 rpm
Base to Shaft Center Height w/High Vert. Base Kit 5.59 in
Use With 726
Frame Size 56C
Input HP @ RPM 1.33 hp @ 1750 rpm, 0.89 hp @ 1150 rpm
Washdown Duty No
Housing Material Cast Iron
Output RPM @ 1750 rpm Input 44 rpm
Bolt Center 6 3/8 in x 3 3/8 in
Center Distance 2 5/8 in
Lubrication None
Motor Application General Purpose
Frame 56C
Output Configuration Left Output
Box Length 7 3/8 in
Output Torque @ RPM 1512 in lb @ 1750 rpm, 1500 in lb @ 1150 rpm
Max. Thrust Load @ RPM 900 lb/in @ 1750 rpm, 900 lb/in @ 1150 rpm
Weight 41.1 LB
EAN or UPC 781711520444
NSN Number 6105-01-226-7232
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison