Skip to content Skip to navigation menu


700 Series C-Face Quilled Double Reduction Parallel Reducer

Item #101901676
    Shipment Options

Product details

  • 1.330" Center Distance
  • 600:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output


  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life


  • Do not use on wire reinforced hose


Bolt Centers w/ Vertical "J" Base Kit (in) 6.41 x 2.00
Torque Out @ 1750 rpm 340 in lb
Motor Application General Purpose
Output Configuration Left Output
Shaft Assembly Code G
Box Height 4 21/32 in
Keyway Size 3/16 x 3/32
Base to Shaft Center Height w/Low Vert. Base Kit 2.31 in
Base to Shaft Center Height w/High Vert. Base Kit 3.56 in
Base to Shaft Center Height w/Vert. "J" Base Kit 2.94 in
Lubrication None
Bolt Centers w/ Vertical Base Kits (in) 6.16 x 3.25
Bolt Center 3 1/4" x 2"
Housing Material Cast Iron
Max. Thrust Load @ 1150 rpm 300 lb/in
Fan Cooled No
Bore Code B5
Motor HP 0.17 hp
Family Name FWA
Thermal Input Horsepower @ 1750 RPM N/A
Ratio 600:1
Reduction Type Double Reduction
Box Width 7 1/2 in
Max. Overhung Load @ 1750 rpm 200 lb/in
Worm Position Universal¦Parallel
Base to Centerline of Input Shaft 2 19/32 in
Frame 56C
Frame Size 56C
Input Configuration C-Face Quilled
Base to Shaft Center Height w/Std. Base Kit 3.47 in
Input (Shaft or Bore) Size 5/8 in
Bolt Centers w/ Std. Base Kit (in) 4 3/8 x 3 5/16
Box Length 4 in
HP @ RPM 0.08333333 hp @ 1800 rpm
Washdown Duty No
Base to Centerline of Output Shaft 2 15/16 in
Output (Shaft or Bore) Size 5/8 in
Center Distance 1.33 in
Output RPM @ 1750 rpm Input 2.92 rpm
Torque Out @ 1150 rpm N/A
Weight 18.1 LB
EAN or UPC 781711525173
Close Compare List Open Compare List Toggle

Product Comparison