Skip to content Skip to navigation menu


700 Series C-Face Quilled Double Reduction Parallel Reducer

Item #101854829
    Shipment Options

Product details

  • 1 3/4" Center Distance
  • 100:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output


  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life


  • Must be filled to the proper level with the recommended lubricant for your application before operation


Lubrication None
Motor Application General Purpose
Base to Centerline of Output Shaft 3 11/16 in
Max. Overhung Load @ 1750 rpm 500 lb/in
Family Name FWA
Base to Shaft Center Height w/High Vert. Base Kit 4.38 in
Frame Size 56C
Bolt Centers w/ Vertical Base Kits (in) 7.38 x 4.00
Base to Centerline of Input Shaft 2 15/16 in
Input Configuration C-Face Quilled
Thermal Input Horsepower @ 1750 RPM N/A
Reduction Type Double Reduction
Output Configuration Left Output
Output RPM @ 1750 rpm Input 17.5 rpm
Input (Shaft or Bore) Size 5/8 in
Box Length 5 1/16 in
Center Distance 1 3/4 in
Bolt Center 4 3/16 in x 2 3/4 in
Bore Code B5
Torque Out @ 1150 rpm N/A
Box Height 5 3/4 in
Frame 56C
Ratio 100:1
Fan Cooled No
Base to Shaft Center Height w/Std. Base Kit 4.38 in
Keyway Size 3/16 x 3/32
Max. Thrust Load @ 1150 rpm 500 lb/in
Shaft Assembly Code G
Base to Shaft Center Height w/Vert. "J" Base Kit 3.5 in
Torque Out @ 1750 rpm 570 in lb
Washdown Duty No
HP @ RPM 0.25 hp @ 1800 rpm
Bolt Centers w/ Vertical "J" Base Kit (in) 7.63 x 2.50
Motor HP 1/4 hp
Box Width 8 7/8 in
Worm Position Universal¦Parallel
Output (Shaft or Bore) Size 7/8 in
Housing Material Cast Iron
Base to Shaft Center Height w/Low Vert. Base Kit 3 in
Bolt Centers w/ Std. Base Kit (in) 5 3/4 x 4 1/2
Weight 26.1 LB
EAN or UPC 781711525340
Close Compare List Open Compare List Toggle

Product Comparison