Skip to content Skip to navigation menu
700 Series C-Face Quilled Double Reduction Parallel Reducer

FWA721-300-B5-G

700 Series C-Face Quilled Double Reduction Parallel Reducer
Item #102123837
  • 2 1/16" Center Distance
  • 300:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output
  • Universal, Parallel Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
700 Series C-Face Quilled Double Reduction Parallel Reducer
    Shipment Options
  • 2 1/16" Center Distance
  • 300:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
Base to Shaft Center Height w/Low Vert. Base Kit 3.13 in
Frame Size 56C
Washdown Duty No
Keyway Size 3/16 x 3/32
Bolt Center 5 in x 2 7/8 in
Torque Out @ 1750 rpm 1025 in lb
Bolt Centers w/ Vertical Base Kits (in) 8 3/8 x 4 7/8
Bolt Centers w/ Vertical "J" Base Kit (in) 8.63 x 2.63
Base to Shaft Center Height w/Std. Base Kit 4.81 in
Bolt Centers w/ Std. Base Kit (in) 6 3/8 x 4 11/16
Ratio 300:1
Output Configuration Left Output
Base to Centerline of Output Shaft 4 3/32 in
Fan Cooled No
Base to Shaft Center Height w/Vert. "J" Base Kit 3.94 in
Shaft Assembly Code G
Box Length 5 13/64 in
Frame 56C
Max. Overhung Load @ 1750 rpm 700 lb/in
Torque Out @ 1150 rpm N/A
Lubrication None
Max. Thrust Load @ 1150 rpm 700 lb/in
Reduction Type Double Reduction
Center Distance 2 1/16 in
Worm Position Universal¦Parallel
Input Configuration C-Face Quilled
Base to Centerline of Input Shaft 3 3/8 in
Motor Application General Purpose
Base to Shaft Center Height w/High Vert. Base Kit 4.88 in
Box Width 9 55/64 in
Box Height 6 25/64 in
Motor HP 1/4 hp
Housing Material Cast Iron
Input (Shaft or Bore) Size 5/8 in
Output (Shaft or Bore) Size 1 in
HP @ RPM 0.25 hp @ 1800 rpm
Output RPM @ 1750 rpm Input 5.8 rpm
Bore Code B5
Thermal Input Horsepower @ 1750 RPM N/A
Family Name FWA
Weight 35.1 LB
EAN or UPC 781711523421
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison