Skip to content Skip to navigation menu
700 Series C-Face Quilled Double Reduction Parallel Reducer

FWA726-300-B5-G

700 Series C-Face Quilled Double Reduction Parallel Reducer
Item #100992643
  • 2 5/8" Center Distance
  • 300:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output
  • Universal, Parallel Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
700 Series C-Face Quilled Double Reduction Parallel Reducer
    Shipment Options
  • 2 5/8" Center Distance
  • 300:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Must be filled to the proper level with the recommended lubricant for your application before operation
Input Configuration C-Face Quilled
Base to Centerline of Output Shaft 5 1/16 in
Fan Cooled No
Torque Out @ 1750 rpm 1950 in lb
Box Height 8 in
Output (Shaft or Bore) Size 1 1/8 in
Housing Material Cast Iron
Base to Shaft Center Height w/Vert. "J" Base Kit 4.75 in
Frame 56C
Keyway Size 3/16 x 3/32
Shaft Assembly Code G
Frame Size 56C
Output Configuration Left Output
Center Distance 2.625 in
Ratio 300:1
Max. Thrust Load @ 1150 rpm 900 lb/in
Bolt Centers w/ Vertical Base Kits (in) 10.13 x 5.75
Box Width 6 in
Output RPM @ 1750 rpm Input 5.8 rpm
Motor Application General Purpose
Base to Centerline of Input Shaft 3 25/32 in
Max. Overhung Load @ 1750 rpm 1000 lb/in
Bolt Centers w/ Vertical "J" Base Kit (in) 10.38 x 3.13
Lubrication None
Bolt Center 6 3/8 in x 3 3/8 in
HP @ RPM 0.5 hp @ 1800 rpm
Reduction Type Double Reduction
Base to Shaft Center Height w/Std. Base Kit 5.81 in
Base to Shaft Center Height w/Low Vert. Base Kit 3.63 in
Base to Shaft Center Height w/High Vert. Base Kit 5.59 in
Bore Code B5
Bolt Centers w/ Std. Base Kit (in) 8 x 5 1/4
Torque Out @ 1150 rpm N/A
Box Length 11 21/32 in
Motor HP 0.33 hp
Input (Shaft or Bore) Size 5/8 in
Thermal Input Horsepower @ 1750 RPM N/A
Washdown Duty No
Worm Position Universal¦Parallel
Family Name FWA
Weight 51.1 LB
EAN or UPC 781711523551
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison