Skip to content Skip to navigation menu


700 Series C-Face Quilled Double Reduction Right Angle Reducer

Item #101901678
    Shipment Options

Product details

  • 1 3/4" Center Distance
  • 600:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output


  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life


  • Plastic cushion grips are intended for comfort and do not protect from electrical shock


Input Configuration C-Face Quilled
Worm Position Universal¦Right Angle
Motor HP 0.17 hp
Input (Shaft or Bore) Size 5/8 in
Reduction Type Double Reduction
Bore Code B5
Box Width 8 7/8 in
Housing Material Cast Iron
Washdown Duty No
Box Height 5 3/4 in
Center Distance 1.75 in
Output RPM @ 1750 rpm Input 2.92 rpm
Frame Size 56C
Base to Shaft Center Height w/Vert. "J" Base Kit 3.5 in
Base to Centerline of Output Shaft 2 1/16 in
Shaft Assembly Code G
Bolt Centers w/ Std. Base Kit (in) 5 3/4 x 4 1/2
Output Configuration Left Output
Lubrication None
Bolt Centers w/ Vertical Base Kits (in) 7.38 x 4.00
Torque Out @ 1150 rpm N/A
Family Name FWC
Frame 56C
Ratio 600:1
Base to Shaft Center Height w/High Vert. Base Kit 4.38 in
Max. Thrust Load @ 1150 rpm 500 lb/in
Thermal Input Horsepower @ 1750 RPM N/A
Keyway Size 3/16 x 3/32
Output (Shaft or Bore) Size 7/8 in
Base to Shaft Center Height w/Low Vert. Base Kit 3 in
Max. Overhung Load @ 1750 rpm 500 lb/in
Fan Cooled No
Motor Application General Purpose
HP @ RPM 0.125 hp @ 1800 rpm
Box Length 5 1/16 in
Bolt Center 4 3/16 in x 2 3/4 in
Base to Centerline of Input Shaft N/A
Torque Out @ 1750 rpm 710 in lb
Bolt Centers w/ Vertical "J" Base Kit (in) 7.63 x 2.50
Base to Shaft Center Height w/Std. Base Kit 4.38 in
Weight 26.1 LB
EAN or UPC 781711525531
Close Compare List Open Compare List Toggle

Product Comparison