Skip to content Skip to navigation menu


FWC718-900-B5-G

700 Series C-Face Quilled Double Reduction Right Angle Reducer

Item #101871082
each
    Shipment Options

Product details

  • 1 3/4" Center Distance
  • 900:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Must be filled to the proper level with the recommended lubricant for your application before operation

Specifications

Motor Application General Purpose
Lubrication None
Worm Position Universal¦Right Angle
Torque Out @ 1750 rpm 710 in lb
Output RPM @ 1750 rpm Input 1.94 rpm
Base to Shaft Center Height w/Std. Base Kit 4.38 in
Keyway Size 3/16 x 3/32
Family Name FWC
Center Distance 1 3/4 in
Box Height 5 3/4 in
Ratio 900:1
Base to Centerline of Input Shaft N/A
Motor HP 0.17 hp
Max. Thrust Load @ 1150 rpm 500 lb/in
Frame Size 56C
Shaft Assembly Code G
Input (Shaft or Bore) Size 5/8 in
Washdown Duty No
Bolt Centers w/ Std. Base Kit (in) 5 3/4 x 4 1/2
Base to Shaft Center Height w/High Vert. Base Kit 4.38 in
Base to Shaft Center Height w/Low Vert. Base Kit 3 in
Base to Centerline of Output Shaft 2 1/16 in
Input Configuration C-Face Quilled
Thermal Input Horsepower @ 1750 RPM N/A
Torque Out @ 1150 rpm N/A
Frame 56C
Fan Cooled No
Output (Shaft or Bore) Size 7/8 in
Bore Code B5
Output Configuration Left Output
HP @ RPM 0.08333333 hp @ 1800 rpm
Bolt Centers w/ Vertical "J" Base Kit (in) 7.63 x 2.50
Box Width 8 7/8 in
Bolt Center 4 3/16 in x 2 3/4 in
Housing Material Cast Iron
Max. Overhung Load @ 1750 rpm 500 lb/in
Box Length 5 1/16 in
Bolt Centers w/ Vertical Base Kits (in) 7.38 x 4.00
Reduction Type Double Reduction
Base to Shaft Center Height w/Vert. "J" Base Kit 3.5 in
Weight 26.1 LB
EAN or UPC 781711525555
Close Compare List Open Compare List Toggle

Product Comparison