Skip to content Skip to navigation menu


700 Series C-Face Quilled Double Reduction Right Angle Reducer

Item #101855247
    Shipment Options

Product details

  • 2 5/8" Center Distance
  • 1800:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output


  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life


  • Steel housings must be used for operating pressures above 210 bar (3,000 psi)


Reduction Type Double Reduction
Bolt Centers w/ Vertical "J" Base Kit (in) 10.38 x 3.13
Output (Shaft or Bore) Size 1 1/8 in
Max. Overhung Load @ 1750 rpm 1000 lb/in
Bore Code B5
Family Name FWC
Motor Application General Purpose
Worm Position Universal¦Right Angle
Input Configuration C-Face Quilled
Output Configuration Left Output
Box Height 8 in
Base to Shaft Center Height w/Vert. "J" Base Kit 4.75 in
Washdown Duty No
Base to Shaft Center Height w/High Vert. Base Kit 5.59 in
Fan Cooled No
Frame Size 56C
Keyway Size 3/16 x 3/32
Bolt Center 6 3/8 in x 3 3/8 in
Output RPM @ 1750 rpm Input 0.97 rpm
Max. Thrust Load @ 1150 rpm 900 lb/in
HP @ RPM 0.1666667 hp @ 1800 rpm
Torque Out @ 1150 rpm N/A
Box Length 11 21/32 in
Housing Material Cast Iron
Shaft Assembly Code G
Bolt Centers w/ Std. Base Kit (in) 8 x 5 1/4
Base to Centerline of Output Shaft 2 15/16 in
Torque Out @ 1750 rpm 1775 in lb
Thermal Input Horsepower @ 1750 RPM N/A
Frame 56C
Box Width 6 in
Lubrication None
Base to Shaft Center Height w/Low Vert. Base Kit 3.63 in
Base to Centerline of Input Shaft N/A
Ratio 1800:1
Base to Shaft Center Height w/Std. Base Kit 5.81 in
Bolt Centers w/ Vertical Base Kits (in) 10.13 x 5.75
Center Distance 2 5/8 in
Motor HP 0.17 hp
Input (Shaft or Bore) Size 5/8 in
Weight 51.1 LB
EAN or UPC 781711524688
Close Compare List Open Compare List Toggle

Product Comparison