Skip to content Skip to navigation menu


14.5° Pressure Angle Spur Gear

Item #101773423
    Shipment Options

Product details

  • Reborable Non-Metallic Gear
  • 10 Diametral Pitch
  • 14.5° Pressure Angle
  • 25 Teeth
  • 2 1/2" Pitch Diameter


  • Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
  • most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.


  • Four ball wear test 40 kg: 63 mm
  • More cost effective, quieter running and metallic options
  • Reliability from steel, cast iron and brass
  • Parallel shaft applications
  • Base oil viscosity: 500 SUS @ 100 °F


Diametral Pitch 10
Torque at 1800 RPM 81 lb/in
Hardened Teeth Without Hardened Teeth
Outside Dia. 2.7 in
Origin Reborable
Torque at 300 RPM 140 lb/in
Material Nonmetallic
Torque at 900 RPM 99 lb/in
No. of Teeth 25
Bore Size 0.75 in
Length Through Bore 1.62 in
Bore Type Reborable
Set Screw No
Pitch Diameter 2.5 in
Pressure Angle 14.5 °
Hub Dia. 2 3/16 in
Torque at 1200 RPM 90 lb/in
Torque at 200 RPM 161 lb/in
Keyway w/o Keyway, w/o Setscrew
Torque at 600 RPM 114 lb/in
Weight 0.331 LB
EAN or UPC 781711090701
Close Compare List Open Compare List Toggle

Product Comparison