Skip to content Skip to navigation menu
Non-Metallic Spur Gear

QFH25

Non-Metallic Spur Gear
Item #101773423
  • Reborable Non-Metallic Gear
  • 10 Diametral Pitch
  • 14.5° Pressure Angle
  • 25 Teeth
  • 2 1/2" Pitch Diameter
  • 1" Face Width
  • 3/4" Bore Size
+ Show More + Show Less
Non-Metallic Spur Gear
    Shipment Options
  • Reborable Non-Metallic Gear
  • 10 Diametral Pitch
  • 14.5° Pressure Angle
  • 25 Teeth
  • 2 1/2" Pitch Diameter

description

  • Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
  • most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.

features

  • More cost effective, quieter running and metallic options
  • Four ball wear test 40 kg: 63 mm
  • Reliability from steel, cast iron and brass
  • Parallel shaft applications
  • Base oil viscosity: 500 SUS @ 100 °F
Bore Type Minimum Plain Bore
Hub Dia. 2 3/16 in
Length Through Bore 1.625 in
Type A
Pressure Angle 14.5 °
Material Non-Metallic
Set Screw No
Torque at 1800 RPM 81 lb/in
Torque at 900 RPM 99 lb/in
Bore Size 0.750 in
Pitch Diameter 2.5 in
Outside Dia. 2.7 in
Origin Reborable
No. of Teeth 25
Torque at 300 RPM 140 lb/in
Outside Dia. [Min] 2.7 in
Hardened Teeth Without Hardened Teeth
Keyway w/o Keyway, w/o Setscrew
Torque at 1200 RPM 90 lb/in
Torque at 200 RPM 161 lb/in
Diametral Pitch 10
Torque at 600 RPM 114 lb/in
Weight 0.331 LB
EAN or UPC 781711090701
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison