Rugged Cast-Iron Housing: Provides maximum strength and dependability.
High lead angle worm is case hardened, ground and polished.
Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
Output (Shaft or Bore) Size
5/8 in
Gear Drive Reductions
Single
Max. Thrust Load @ 1150 rpm
916 lbf
Thermal Output Torque Rating
209 @ 1750 Input
Output Torque
209 in-lbs @1750 Input RPM
Output RPM @ 1750 rpm Input
350 rpm
Thermal Input Horsepower @ RPM
0.86 hp @ 1150 rpm, 1.11 hp @ 1750 rpm
Output Speed
350 rpm
Base to Shaft Center Height w/Low Vert. Base Kit
2.31 in
Efficiency
0.8
Reducer
Worm - Right Angle
Motor Frame Size
56C
Washdown Duty
No
Base to Shaft Center Height w/High Vert. Base Kit
3.56 in
Output Configuration
Left & Right Output
Gear Type
Worm
Output Shaft Key Length
1.5
Box Length
4 in
Base to Shaft Center Height w/Std. Base Kit
2 1/4 in
Shaft Size
0.625
Input Dia.
0.625 in
HP @ RPM
0.75 hp @ 1200 rpm, 1 hp @ 1800 rpm
Bolt Centers w/ Std. Base Kit (in)
4 3/8 x 3 5/16
Output Shaft Orientation
LR
Thermal Input Horsepower @ 1750 RPM
1.11 hp
Max. Thrust Load @ RPM
811 lbf @ 1750 rpm, 916 lbf @ 1150 rpm
Input Bore (C Face)
0.625 in
Thermal Output Torque @ RPM
183 in lb @ 1750 rpm, 211 in lb @ 1150 rpm
Shaft Seal Material
Nitrile
Assembly
Q-LR
Output RPM @ Input RPM
350 rpm @ 1750 rpm
No. of Gear Reductions
Single
Input Style
C-Face Quill
Output RPM
350
Box Height
4.66 in
Output Shaft Direction
Double
Mechanical Output Torque Rating
209 @ 1750 Input
Output Shaft Key Square
0.188
Box Width
2.88 in
Output Torque @ RPM
183 in lb @ 1750 rpm, 211 in lb @ 1150 rpm
Input (Shaft or Bore) Size
5/8 in
Output Shaft Assembly Code
D
Output Key
3/16 x 1.31
Center Distance Range
1 in Thru 3.25 in
Max. Overhung Load @ 1750 rpm
458 lbf
Input Speed
1750 rpm
Series
Raider
Center Distance
1.33 in
Torque Out @ 1750 rpm
183 in lb
Input Configuration
C-Face Quilled
Max. Input HP @ 100 rpm
0.1 hp
Reducer Style
Standard
Output Torque Range
< 250 in lbs
Frame Size
56C
Motor Application
General Purpose
HP Range
1 to 1-1/2 (< 2)
O.D.
0.625 in
Input HP @ RPM
0.86 hp @ 1150 rpm, 1.11 hp @ 1750 rpm
Input HP
1.28 @ 1750 RPM
Output Shaft Thrust Load [Max]
811
Base to Shaft Center Height w/Vert. "J" Base Kit
2.94 in
Ratio
5:1
Bolt Centers w/ Vertical "J" Base Kit (in)
6.42 x 2
Frame
56C
Torque Out @ 1150 rpm
211 in lb
Housing Material
Cast Iron
Input Keyway (C Face)
3/16 x 3/32
Bolt Centers w/ Vertical Base Kits (in)
6 5/32 x 3 1/4
Max. Overhung Load @ RPM
458 lbf @ 1750 rpm
Thermal Input Horsepower
1.248 @ 1750 Input
Service Factor
1
Output Shaft OHL [Max]
458
Output Shaft
Solid
Weight
17.0 LB
EAN or UPC
662288337812
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
