Skip to content Skip to navigation menu
  • This part may be obsolete or discontinued but limited quantities may exist.


MD5315

5000 Series Spherical Roller Bearing Duplex Unit

Item #101592533
each
    Shipment Options

Product details

  • Spherical Roller Bearing Duplex Unit
  • 3 15/16 in Shaft Diameter
  • 9 1/8 in Height
  • 8 3/4 in Bolt Circle Diameter
  • 5/8 in Bolt Size

features

  • Easy bearing clearance: can be field adjusted to meet application needs
  • Mounting to suit the load and installation requirements
  • Shaft ready: prelubricated with standard grease for normal operation
  • other lubricants available for special conditions
  • Fully self-aligning: spherical roller bearing to accommodate operational and installation misalignment
  • Rugged housing: standard material – cast iron, steel or ductile iron available on request
  • Carburized raceways: case-carburized inner races provide a hard, fatigue-resistant surface and a tough, crack-resistant ductile core
  • Interchangeable seals: three types of seals to match the application requirements: Z seal, for the broad range of normal operating conditions
  • K seal, for dusty, dirty conditions
  • and M seal, for protection against liquid contamination
  • For extra protection under severe conditions, auxiliary caps are also available

Specifications

Collar O.D. 5 5/8 in
Bolt Circle Dia. 8 3/4 in
Locking Device Double Setscrew Locking Collar
Width Between Flanges [Min] 3.180 in
Type Spring Loaded
Outer Race Diameter 7.089 in
Length Across Flats 8 5/8 in
Series 5000
Width Between Flanges [Max] 3.200 in
Seal Type Triple Lip Heavy Contact Seals
Size Code 11
Recommended Housing Bore Diameter [Min] 7.0875 in
Bore Dia. [Min] 1 7/16 in
Bearing Type Spherical Roller Bearing
RPM [Max] 1200 rpm
Bolt Size 5/8 in
Housing Material Cast Iron
Bolt Hole Spacing 6 3/16 in
Shaft Dia. 3.9375 in
Bore Dia. [Max] 4 in
Flange Thickness 17/32 in
Inner Ring Hub Diameter 4 9/16 in
Mounting Pad Width 8.625 in
Recommended Housing Bore Diameter [Max] 7.089 in
Set Screw Torque 1350 in lb
Temperature Range [Max] 225 °F
Flange Pilot Diameter Step Width 15/64 in
Length Through Bore 6.125 in
Collar Extension 1 in
Weight 35.0 LB
EAN or UPC 698210688486
Close Compare List Open Compare List Toggle

Product Comparison