Skip to content Skip to navigation menu



Item #100916251
    Shipment Options

Product details

  • 23 3/4" Shaft Diameter
  • 25.520" Housing Bore Diameter
  • 0.790" Width
  • Nitrile
  • Type VR1


  • All rubber, split seal, single element, spring loaded. Placed around the shaft and pushed into the seal bore. Held firmly by cover plate that compresses the split joint together.


  • Seals for dirt exclusion
  • Will run against case of seal or housing
  • Hand fitted, no housing required


Installation Streched On Shaft
Pressure [Max] 10 psi
Temperature Range [Max] 225 °F
I.D. 21.26 in, 540 mm
Shaft Dia. [Max] 24.8 in, 630 mm
Shaft Dia. [Min] 22.83 in, 580 mm
Construction VR1
Case Construction All Rubber
Cross Section 0.79 in, 20 mm
Misalignment & Runout (In. @ Feet Per Minute) 1-4 ° @2400, 5 ° @3000
Pressure Differential [Max] 4.35 psi
Temperature Range [Min] -65 °F
Seal Design Molded Design
Pressure 10 psi
Operating Temperature [Min] -40 °F
Overall Width 0.56 in, 25 mm
Shoulder Width 25.52 in
Spring Material None
Lip Type Face Seal
Seal Material Nitrile Rubber (NBR)
Lip Material Nitrile
Inch/Metric Metric
Seal Application Dirt Exclusion
Cover/Compensation Ring/Plate Required No
Lip Style External
Operating Temperature [Max] 210 °F
Shaft Dia. 23.75 in
Weight 1.924 LB
EAN or UPC 85311090667
Close Compare List Open Compare List Toggle

Product Comparison