Find a Service Center
Alternate Products
- 1.13 in Shaft Diameter
- 1.62 in Housing Bore Diameter
- 0.26 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
applications
- Engines
- Drive axles
- Transmissions
- Pumps
- Electric motors
- Speed reducers
- Engines
- Transmissions
- Electric motors
features
- Spring-loaded design
- Economical general-purpose seal
- Provides light dirt exclusion enhancing the service life of the lubricant retaining spring-loaded main lip
- Provides medium dirt exclusion
- For greater strength and protection of the sealing lip
| Spring Type | Garter |
| Case Design | Metal Case |
| Construction | CRWA1 |
| Temperature Range [Max] | 225 °F |
| Spring Material | Carbon Steel |
| Lubricant | Oil or Grease |
| Installation | Housing Press Fit |
| Bore Sealant | Bore Tite |
| Seal Application | Dirt Exclusion and Lubricant Retention |
| Overall Width | 0.26 in, 6.5 mm |
| Temperature Range [Min] | -65 °F |
| Speed | 0.07 ft/min |
| Design | CRWA1 |
| Housing Bore Dia. | 1.62 in, 41.25 mm |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Operating Temperature [Min] | -40 °F |
| Solid | Yes |
| Cover/Compensation Ring/Plate Required | No |
| Operating Temperature [Max] | 210 °F |
| Lip Type | Dual Lip |
| Case Material | Steel |
| Lip Material | Nitrile Rubber (NBR) |
| Pressure | 10 psi |
| Shaft Dia. | 1.13 in, 28.58 mm |
| Lip Style | Internal |
| Seal Design | Bonded Design |
| Inch/Metric | Inch |
| Case Construction | Steel Case w/o Inner Case |
| Weight | 0.035 LB |
| EAN or UPC | 85311009485 |
