Skip to content Skip to navigation menu


DRNR2 3/16

DRNR Series Cast Iron 2-Bolt Ball Bearing Pillow Block

Item #100733692
each
    Shipment Options

Alternate Products

Product details

  • 2.1875" Shaft, 3.5" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type

description

  • The Fafnir double rigid pillow block, type DRNR, is designed to provide a sturdy two-bearing mounting for fans and blowers, bench grinders, buffers, vertical shafts, and similar heavy-duty applications. The compact, one-piece housing is equipped with two Fafnir wide inner ring bearings with integral, R-seals and self-locking collar. Individual grease chambers are provided for each bearing. Close-clearance baffles allow excess grease to work into the spacious center chamber of the housing. Grease fittings installed in place of the standard pipe plugs will provide means of relubrication. Type DRNR pillow blocks can be mounted in any position with ample radial and thrust capacity ensured at all times.

applications

  • Agriculture
  • Fans and blowers
  • Food processing
  • Conveyors

Specifications

Lubrication Relubricatable
Bolt Hole Length 1 1/8 in
Locking Device Eccentric Locking Collar
Series DRNR Series
Shaft Dia. 2.1875 in
Housing Material Cast Iron
Bearing Design Non-Expansion
Pillow Block Type Thru-Bolt
Housing Width 5 1/4 in
Overall Width 14 in
End Type Open End
Housing Height 6 1/4 in
Mounted Unit Duty Normal-Duty
Housing Construction 1 Piece
Bearing Type Ball Bearing
Collar O.D. 3 in
Inch/Metric Inch
Seal Type Contact Seals
Base Width 7 in
Bearing Insert 1203KR
Bolt Holes 2
Base Height 1 1/4 in
Bolt Size 5/8 in
Length Through Bore 14 in
Bolt Hole Width 11/16 in
Base Length 12 in
Bolt Hole Spacing 9 1/2 in
Insert Type Steel Insert
Weight 45.778 LB
EAN or UPC 87796061132
Close Compare List Open Compare List Toggle

Product Comparison