Skip to content Skip to navigation menu


RACL506

Single-Acting Hydraulic Cylinder

Item #100191802
each
    Shipment Options

Product details

  • 5.91 in Stroke
  • 5.12 in Outside Diameter

features

  • Aluminum Lock Nut provides mechanical load holding for extended periods
  • Hardened steel stop ring increases cylinder life and resistance to side-loads of up to 5%
  • Hard coat finish on all surfaces resists damage and extends cylinder life
  • Composite bearings increase cylinder life and side load resistance
  • Handles included on all models
  • Steel base plate and saddle for protection against load-induced damage
  • Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
  • High-strength return spring for rapid cylinder retraction
  • CR-400 coupler and dustcap included on all models
  • All cylinders meet ASME B-30.1 standards

Specifications

Stroke Range 4.5 to 6.99 in, 120 to 174 mm
Plunger Type Solid
Optional Tilt Saddle Addition To Collapsed Height 0.55 in, 14 mm
Body Material Aluminum
Saddle Maximum Tilt Angle Radius 5 degrees
O.D. 5.12 in, 130 mm
Cylinder Effective Area - Advance 10.99 in2, 70.9 cm2
Optional Tilt Saddle Diameter 2.8 in
Plunger Diameter 3.15 in, Tr 80x4
Base Mounting Holes Bolt Circle 110 mm
Action Single-Acting
Material Aluminum
Base Mounting Holes Thread M6
Base Mounting Holes Thread Depth 12 mm
Collapsed Height 13.23 in, 336 mm
Base To Advance Port 1.19 in, 30 mm
Extended Height 19.14 in, 486 mm
Oil Capacity - Advance 64.95 in3, 1063 cm3
Locknut Height 2.95 in, 50 mm
Saddle Protrusion From Plunger 0.12 in, 24 mm
Surface Treatment Anodized
Cylinder Capacity Advance [MAX] 496 kN
Operating Pressure [Max] 10000 psi, 700 bar
Operating Pressure Ranges [MAX] 10000 psi
Bore Size 3.74 in, 95 mm
Series RACL
Return Type Single-Acting, Spring Return
Cylinder Class 50 Ton
Stroke 5.91 in, 150 mm
Saddle Diameter 1.97 in, 71 mm
Weight 32.6 LB
EAN or UPC 662005125920
Close Compare List Open Compare List Toggle

Product Comparison