Skip to content Skip to navigation menu
Cast Iron Housing Ball Bearing 2 Bolts Pillow Block

P2BSC105

Cast Iron Housing Ball Bearing 2 Bolts Pillow Block
Item #100939320
  • 2 Bolts
  • Cast Iron Housing Material
  • Solid Housing Construction
  • Steel Insert Material
Cast Iron Housing Ball Bearing 2 Bolts Pillow Block
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 2 Bolts
  • Cast Iron Housing Material
  • Solid Housing Construction
  • Steel Insert Material

applications

  • Air handling
  • Unit handling
  • Food and beverage
  • Forest products
  • Paper
  • Automotive
  • Chemical
  • Packaging and processing

features

  • Inner and outer rings are precision hardened and honed for wear resistance and quiet operation
  • DualGuard sealing system includes a mechanically retained, land riding, single lip contact seal plus a patented rubberized flinger for enhanced protection against contaminants
  • Ball cage is made of heat stabilized nylon with fiberglass reinforcement, which allows higher operating temperatures and greater flexibility with added strength
  • Anti-rotation pin makes insert replacement easier with no need to replace grease fittings or location pins
  • 65° setscrew spacing offers an optimum balance between locking force and inner ring stress
  • Grade 10 balls for quieter operation and less vibration
Base Height 23/32 in
Locking Device Setscrew Locking Inner Ring
Bolt Hole Spacing Range [Max] 5 7/16 in
Bolt Hole Spacing 5 1/16 in
Series P2BSC
Standoff Housing No
Speed [Max] 3500 rpm
Bearing Insert INSSC105
Suitable for High Temperature No
Outer Ring Size 207
Base Length 6 1/2 in
Bore Length 1.71 in
End Type Open End
Inch/Metric Inch Bore
Pillow Block Type Thru-Bolt
Base Width 1 3/4 in
Bearing Type Ball Bearing
Housing Construction Solid
Grease Name Unirex N2
Length Through Bore 1.53125 in
Bolt Diameter 0.5 in
Ball Bearing Series 207 Series
Seal Type Contact Seals
Shaft Dia. 1.3125 in
Insert Type Steel Insert
Insert Material Steel
Take-Up Frame Size LD-20, TS-250
Mounted Unit Duty Normal-Duty
Bolt to Bolt [Min] 4.68 in
Bolt to Bolt [Max] 5.44 in
Shaft Attachment Setscrew
Bearing Design Non-Expansion
Suitable For Washdown No
Sensor Ready Adapter Required
Bolt Holes 2
No. of Bolts 2
Housing Height 3 3/4 in
Expansion Capability Fixed
Static Load Capacity 3461 lbf
Bolt Hole Spacing Range [Min] 4 11/16 in
Base to Center Height 1.88 in
Housing Material Cast Iron
Misalignment Range ±2°
Dynamic Load Capacity 5759 lbf
Bolt Hole Length 15/16 in
Lubrication Grease
Greasable Yes
Weight 3.3 LB
EAN or UPC 782475113897
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison