Find a Service Center
Alternate Products
- Timing Belt Pulley
- 7/8 in Belt Pitch
- XH Belt Size
- 28 Tooth
- 4 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Type | QD |
| Finished Bore | N/A |
| Bore Size [Min] | 0.875 in |
| Flange O.D. | 8.343 in |
| Belt Pitch | 7/8 in |
| Pitch Diameter | 7.799 in |
| Pitch Dia. | 7.799 in |
| Bushing Series | E |
| Belt Size | XH |
| Material External Use | Cast Iron |
| Material Internal Use | Cast Iron |
| Teeth Face Width | 4.688 in |
| Bore Range [Min] | 0.875 in |
| Length Through Bore | 4.688 in |
| Bushing Bore Size [Min] | 0.875 in |
| Construction Internal | Solid |
| Hardened Teeth | With Hardened Teeth |
| No. of Teeth | 28 |
| Hub Type | A |
| Outside Dia. | 7.692 in |
| Belt Width | 4 in |
| Bushing Bore Size [Max] | 8.75 in |
| Type | JF-1 |
| Bore Range [Max] | 3.5 in |
| Bore Size [Max] | 8.75 in |
| Material | Cast Iron |
| Bore Type | Bushed |
| Weight | 24.0 LB |
| EAN or UPC | 697950112961 |
