Skip to content Skip to navigation menu
700 Series C-Face Quilled Reducer

F710-60-B4-G

700 Series C-Face Quilled Reducer
Item #101853884
  • 1" Center Distance
  • 42CZ Frame
  • 60:1 Ratio
  • 1/2" C-Face Quilled Input
  • 5/8" Left Output Shaft
700 Series C-Face Quilled Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 1" Center Distance
  • 42CZ Frame
  • 60:1 Ratio
  • 1/2" C-Face Quilled Input
  • 5/8" Left Output Shaft

features

  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Must be filled to the proper level with the recommended lubricant for your application before operation
Input (Shaft or Bore) Size 1/2 in
Ratio 60:1
Input Configuration C-Face Quilled
Max. Overhung Load @ 1750 rpm 150 lb/in
Bolt Centers w/ Vertical Base Kits (in) 5.13 x 2.31
Washdown Duty No
Output Torque @ RPM 105 in lb @ 1150 rpm, 144 in lb @ 1750 rpm
HP @ RPM 0.08333333 hp @ 1800 rpm
Max. Thrust Load @ RPM 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm
Torque Out @ 1150 rpm 105 in lb
Center Distance 1 in
Motor Application General Purpose
Max. Thrust Load @ 1150 rpm 200 lb/in
Output Configuration Left Output
Box Height 3 5/8 in
Base No
Output (Shaft or Bore) Size 5/8 in
Frame Size 42CZ
Torque Out @ 1750 rpm 144 in lb
Box Width 3 11/32 in
Fan Cooled No
Base to Shaft Center Height w/Std. Base Kit 2 3/4 in
Max. Overhung Load @ RPM 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm
Bolt Centers w/ Std. Base Kit (in) 3 3/4 x 2 7/8
Base to Shaft Center Height w/High Vert. Base Kit 2.94 in
Bolt Center Length x Bolt Center Width 2 5/8 in x 1 11/16 in
Frame 42CZ
Output RPM @ Input RPM 29 rpm @ 1750 rpm
Box Length 4 1/4 in
Thermal Input Horsepower @ 1750 RPM N/A
Max. Input HP @ 100 rpm 0.008 hp
Output RPM @ 1750 rpm Input 29.2 rpm
Input HP @ RPM 0.065 hp @ 1150 rpm, 0.12 hp @ 1750 rpm
Use With 710
Weight 10.1 LB
EAN or UPC 781711439425
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison